PDA

View Full Version : Stangbangerz Pinks build up thread



89notch
03-15-2007, 09:46 PM
Here is the the start to a great project
More pictures to come
http://pic19.picturetrail.com/VOL1039/1948887/3765206/238104926.jpg
http://pic19.picturetrail.com/VOL1039/1948887/3765206/238104915.jpg
http://pic19.picturetrail.com/VOL1039/1948887/3765206/238104901.jpg

Metcalf Racing
03-16-2007, 10:10 AM
You realize you will need a negotiator with a alot of experience and great street knowledge. Someone who can put the opponents car on a number and set the race accordingly.

BlazinEagle
03-16-2007, 03:29 PM
Looks like a good candidate to do some ass kicking!:popcorn:

OrangeStang04
03-16-2007, 03:57 PM
You realize you will need a negotiator with a alot of experience and great street knowledge. Someone who can put the opponents car on a number and set the race accordingly.

So your saying you'll do it???

89notch
03-16-2007, 03:59 PM
:lol: He would be in a fight with Rich within 5 mins. and get us kicked out:lol:

YouGotJunk
03-16-2007, 04:06 PM
I think it would be alot of fun. I definately wanna go, whether i'm part of the crew or not. I'll be supporting forsure..we'll put the safe tune on that Bitch and ask for 12 cars and the wiggle!!!

mustangrfast88
03-17-2007, 01:53 AM
i thought it was the driver that was the negitortor this year what the driver say goes

just a word of advice dont post video on the net of the car running because that screwed one of the teams over before and i am sure i will try to go and help some how

dedpedal
03-17-2007, 03:27 AM
You realize you will need a negotiator with a alot of experience and great street knowledge. Someone who can put the opponents car on a number and set the race accordingly.


I dont think we need someone to embaras us on national TV. We allready had one Waylon...

89notch
04-05-2007, 05:35 PM
A few pics of the build.

http://pic15.picturetrail.com/VOL591/4226507/15952753/243440910.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243440925.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243440932.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243440946.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243440958.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243441191.jpg

A few pics of the heads and intake that Trickflow dontated. Man these things are nice.

http://pic15.picturetrail.com/VOL591/4226507/15952753/243441206.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243441224.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243441445.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243441452.jpg

89notch
04-05-2007, 05:36 PM
Here it is coming apart Brian and Mark came by and helped

http://pic15.picturetrail.com/VOL591/4226507/15952753/243441297.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243441251.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/243441297.jpg

untamed
04-05-2007, 05:39 PM
Where is Pinks at? That would be cool to have a bunch of us go there.

89notch
04-05-2007, 05:40 PM
I'm not sure yet where all they are taping this year but I will let everyone know as soon as I find out

untamed
04-05-2007, 05:42 PM
Thats cool I thought it was in one place all the time. I will go for sure, just let us know. Thanks Tracy

PaulFiveOh
04-05-2007, 05:50 PM
You should photograph the 'custom' fuel pump access door.

7721Cobra
04-05-2007, 06:31 PM
I noticed you have the battery up front still I have a bunch of cable and a box if you want to put it in the trunk.

Looking GOOD

89notch
04-05-2007, 06:42 PM
I noticed you have the battery up front still I have a bunch of cable and a box if you want to put it in the trunk.

Looking GOOD


Yes that is something that we still need

Maximus
04-05-2007, 11:43 PM
So who are we racing?

93hulk
04-06-2007, 12:04 AM
So who are we racing?


We may not know untill the day of the taping. But one thing is for sure they (the opponent) wont like it. Wait till the turbo we have comes in!:D

Maximus
04-06-2007, 12:55 AM
You know what Vinny use to say....All Bling and No Zing makes Johnny a Fucking Ricer. Well, I dont want some blinged out Coupe shouting "look at me" before we even race. Throw some oil on that engine, hang some wires all over the place....nevemind. Kelly, call me at the store.

7721Cobra
04-06-2007, 05:46 AM
Just let me know how to get the box to you

FlatlineCowboy
04-08-2007, 09:28 AM
looking good guys, let me know where the actual race is going to be and I will be there to support ya.

Johnson1134
04-08-2007, 10:21 AM
looking good guys, let me know where the actual race is going to be and I will be there to support ya.

x2....i would love to go watch.:bigthumb

theyallslow
04-08-2007, 10:47 AM
No matter what you do. Win by inches and lose by miles. Take you the break lights so they don’t know that you are slowing the car down at the end of the track. Get in there head as best you can.

and best of luck

thejock60
04-13-2007, 12:52 AM
does the turbo setup mean no NOS? you know u have to lose the first race by a mile right:bigthumb then u can be like that honda that was racing the mustang with flames and get spotted 21 lengths:lol:

COOP
04-19-2007, 05:59 PM
I'm with Craig on the making it look oily and shabby. It would be sweet if there was a way to fake catastrophe, blow smoke out of the exhaust, pretend its hurt, get some sympathy to use to your advantage. Make it seem like it isnt working right

Speed Kills
04-19-2007, 07:15 PM
Wonder if this is who you'll be up against, just saw this thread on ls1tech today.

http://www.ls1tech.com/forums/showthread.php?t=692446

"Chicago, IL - LS1TECH is excited to announce that it will be participating on the popular cable television show Pinks, which can be seen on Speed Channel. This segment will be filmed later this summer, and will air during the fifth season of the show. With an estimated viewership of two million viewers, Pinks is one of the most popular automotive shows on television.

LS1TECH will be going up against a popular online Ford site."

Jeff88coupe
04-19-2007, 07:25 PM
I'm with Craig on the making it look oily and shabby. It would be sweet if there was a way to fake catastrophe, blow smoke out of the exhaust, pretend its hurt, get some sympathy to use to your advantage. Make it seem like it isnt working right


I'm sure we could rig up a way to inject a small amount of oil into the downpipe....make it smoke worse than a cummins.:lol:

BlazinEagle
04-19-2007, 07:52 PM
What kind of gears are we running I have a set of brand new 4.10 gears I would donate if that is not too much gear for a turbo car?

SMOKE
04-19-2007, 08:28 PM
Wonder if this is who you'll be up against, just saw this thread on ls1tech today.


LS1TECH will be going up against a popular online Ford site."

Doesn't look like that's the one we'll be racing. It says they will be racing a modular motor car..

ChrisHunley
04-19-2007, 09:02 PM
Maybe post some things that you need someone may have it or can get it. Or am I just missing something?

89notch
04-19-2007, 11:13 PM
We will be running a set of 3.55 that were donated I going to work on an updated list of whats needed this weekend.

WhiteT
04-19-2007, 11:43 PM
You need the engine to look like it has spray. Basically hook it all up (or make it look that way) but don't use it. Make sure you go "heads up with spray" first race. Hopefully you can win. Next race bargain and say "no bottle this time." Give the other car a length or so. Smoke him again. 2-0 now. For the 3rd race, fake a broke tranny and lose by a bunch. Get some spots for the 4th. Then blow them away!!

Good luck!

PonymanfiveO
04-20-2007, 07:33 AM
LMAO!

hes got it down pat!

mustangboy
04-20-2007, 09:04 AM
Hey guys all these ideas are great but don't you think maybe we should keep them quiet. Once whoever we are racing finds out it is us they will be all over this website seeing what we are doing. As fun as it is to talk about what we are doing it may be best if we keep as much of this stuff hush hush. So if anyone has any ideas maybe they should pm them to Kelly, who can run by all the guys doing the build. Not trying to ruin the fun just trying to keep a competitive advantage.;) :angel:

DeckerEnt
04-20-2007, 11:48 AM
Good point. Lets not give away any secrets. Or is this the ploy all along. We are really building a toyota with 2 blowers, a turbo and lots of Nosssss.
LOL..Keith

bobtsgt
04-20-2007, 11:57 AM
We are really building a toyota Camerywith 2 blowers, a turbo and lots of Nosssss.
LOL..Keith
hahaha there thats more realistic :lol:

untamed
04-28-2007, 11:01 AM
Hey guys all these ideas are great but don't you think maybe we should keep them quiet. Once whoever we are racing finds out it is us they will be all over this website seeing what we are doing. As fun as it is to talk about what we are doing it may be best if we keep as much of this stuff hush hush. So if anyone has any ideas maybe they should pm them to Kelly, who can run by all the guys doing the build. Not trying to ruin the fun just trying to keep a competitive advantage.;) :angel:

I was thinking the same thing. Cant you Moderators delete some of those Great ideas that the guys have thrown out there. That would be ashame for the m to find out our secrets.:D :D :bigthumb

89notch
05-02-2007, 03:32 PM
I should be able to update this thread with some pics of Rigids cage work this week. Or if rob can snap a couple of pics and post them up that would be great.

Rob
05-15-2007, 03:27 PM
You dont want to see the pics i have

PonymanfiveO
05-15-2007, 04:52 PM
Get on it Rob!

I cant wait to do some sanding on this thing!:bounce:

Rob
05-15-2007, 07:35 PM
Oh i'm on it. Just keep having set backs, it will be done tomorrow.

plated
05-21-2007, 08:53 PM
first off rigid race cars did a hell of a job on the cage:bigthumb nice work as always.and i really like rob's attitude a cool dude thanks for stepping up on the project.matt johnson came out and put in work and plans on helping thru the whole project BIG thanks guy your alot of help;) sean(8no4cyl) came out tonight and busted his balls on the engine compartment good job sean,and thanks for your help,i have over 12 hrs in it just today.i hope to see more of the crew step up on this project under the circumstances this is for a really good cause,don't be shy ask if you want to help,i was expecting alot more out of you all on this,i think i can count on one hand who has helped out.lets make this happen gang:)

PonymanfiveO
05-22-2007, 07:18 AM
wheres the pic of me in the sun goggles? :coo1: :lol:

8NO4CYL
05-22-2007, 07:03 PM
The Paris Hilton shades?????? :lol:

plated
05-22-2007, 07:58 PM
i was thinking cher glasses:cool1: paris will work,philj came out and did some sanding tonight thanks dude:bigthumb me and matt johnson are finishing up the drivers side tonight,primer tommorow:cool2: thanks for everyones help,every bit goes a long way.....................

Johnson1134
05-22-2007, 08:07 PM
no problem chris ill be there again tomorrow around 5-5:30 pm.anything for a good cause.

PonymanfiveO
05-23-2007, 07:28 AM
no problem chris ill be there again tomorrow around 5-5:30 pm.anything for a good cause.


same here. :cool2:

plated
05-23-2007, 06:03 PM
primer.....

PonymanfiveO
05-23-2007, 07:01 PM
Nobody better give me shit on my masking job on the windshield! :D


that engine compartment looks waaay better.

TARDY
05-24-2007, 03:29 PM
Daaauuummm who masked off that windsheild?looks terrible

orangedemon331
05-24-2007, 08:33 PM
You guys kick ass, that thing has come along way since I helped Rob with it at Rigid!! Keep up the good work!!!!!

Rob
05-24-2007, 11:18 PM
Ray was a big help :bigthumb I would also like to thank Tom, Kyle, Merrick, and Chris Fry for all of their help while the car was at my shop. I didn't have much time to work on this car so they all helped make it happen. Thanks again guys!


Okay...........lets see some paint !!!!!

mustangrfast88
05-25-2007, 01:18 AM
looking good anybody hear who we will be racing yet i heard from a freind from work ls1tech.com was building a car for pinks

plated
05-25-2007, 01:43 PM
i hope we make the deadline,it's questionable if u ask me. theres about 50 or so days left to get the car done.nowhere nere enough funds to finish it or parts.lets just hope this don't turn out to be a dud:o all thAT FREE LABOR:mad:

Rob
05-25-2007, 03:26 PM
No kidding. What else is needed as far as parts go?

plated
05-25-2007, 04:15 PM
a bellhousing for a glide,spool,axles, those are just a few of the more expensive items still needed.then a ton of small stuff

PonymanfiveO
05-25-2007, 06:45 PM
we still need moldings for the qtr panels too!

Timido
05-25-2007, 07:38 PM
I know if Plated has anything to do with it, It will look good. So lets see Saftey first A kick ass Rigid cage. Plated and the sanding crew is making the car look great. I heard Mike Bell From dayton 5.0 is as we speak getting down with the small block. I stopped by Cincy Speed today to put up my cash. I plan on doing anything I can work wise on building the car. You guys are right a little cash does go a long way. I have nothing but positive things to say about the people who have donated parts services and their own Time and Money. It is time for everyone to step it up a little bit. Remember that you have the oportunity to be part of somthing big. I hope you will take a couple bucks or a part or 2 you have laying around the garage and put them to good use. Its time to PUT UP!

plated
05-25-2007, 08:48 PM
matt johnsnon is a bodyman/painter in disguise:cool1: he truely knows his way around the body/paint stuff.he's doing the jams tonight watch him go:D this is vinny's turbocar car color with a little twist.i'm sure he'd give it the greenlight.thanks to napa&hamlet&smyth for paint and material

orangedemon331
05-26-2007, 08:11 AM
That thing will be sweeeet!!! :eek:

89notch
05-26-2007, 08:55 AM
Man thats looking good

93hulk
05-26-2007, 09:10 AM
Nice job guys! I cant wait to get to start bolting this thing together. Hey Kelly hows the motor coming? When does Mike think it will be ready?

89notch
05-26-2007, 09:18 AM
Nice job guys! I cant wait to get to start bolting this thing together. Hey Kelly hows the motor coming? When does Mike think it will be ready?

I'm hoping we can be putting the motor in next weekend. That will give us about 2 weeks to wire the car and build the turbo kit.

91lxnos
05-29-2007, 09:18 AM
will the motor be ready this saturday???? let me know I will help on the install wprk this weekend.

89notch
05-29-2007, 03:11 PM
I'm hoping I'm calling Mike right now

91lxnos
05-30-2007, 08:16 AM
So any news on the motor and suspension??????

89notch
05-30-2007, 09:33 AM
Nope not yet he is going to call UPR today

Mr.Moontang
05-30-2007, 11:11 AM
Do we need tires, I could call my guy at Nitto and try to score some.

89notch
05-30-2007, 11:46 AM
I'm trying to work with Mickey thompson for some wheels and tires right now so I will let you know ASAP

Timido
05-30-2007, 03:55 PM
Remember Nitto makes slicks also!!!

89notch
05-30-2007, 04:46 PM
Do we need tires, I could call my guy at Nitto and try to score some.

See what you can do still no word from mickey thompson

plated
05-31-2007, 01:18 PM
is this the adapter ring for the glide??

plated
05-31-2007, 05:03 PM
couple pics out side.

89notch
05-31-2007, 05:09 PM
DAmn that looks crazy nice work guys

Mr.Moontang
05-31-2007, 05:29 PM
See what you can do still no word from mickey thompson

What size?

89notch
05-31-2007, 05:31 PM
28 10.5 by 15

Mr.Moontang
05-31-2007, 05:39 PM
28 10.5 by 15

What about fronts?

orangedemon331
05-31-2007, 06:12 PM
couple pics out side.

That is amazing, I love the graphics on the hood!! We might have to transfer some of them onto another orange car in the future!!:eek:

PonymanfiveO
06-01-2007, 12:19 AM
That is amazing, I love the graphics on the hood!! We might have to transfer some of them onto another orange car in the future!!:eek:


get in line bitch!


lol :D

ibstrokin
06-01-2007, 01:02 AM
That thing is looking amazing, especialy considering how it looked before.

RACEME
06-01-2007, 06:28 AM
Do you still need the rear bumper cover?

plated
06-01-2007, 07:21 AM
glassman came thru on a rear cover,quicklx may have the black trim,racme i'll pm ya back as soon as i find out what were still missing,thanks for asking.we do need a drivers side outer marker light still,i found a set of good tailights in my attic

dedpedal
06-01-2007, 07:26 AM
I have the trim that runs along the top of the door opening. Get with me this weekend. Are you still needing a stock flexplate?

orangedemon331
06-01-2007, 07:33 AM
get in line bitch!


lol :D

I'm always in line!!!!!!:lol:

dedpedal
06-01-2007, 07:43 AM
I'm always in line!!!!!!:lol:

As Ronnie James Dio sung.... "The last in line".

Looking good guys.

Silver Bullet
06-01-2007, 07:52 AM
I have the trim that runs along the top of the door opening. Get with me this weekend. Are you still needing a stock flexplate?


I have a stock 50oz and a 28 oz flexplate...

89notch
06-01-2007, 07:59 AM
We would need a 164tooth 0 balance

Gregg@TFS
06-01-2007, 09:55 AM
The car looks GREAT guys!!!!

:bigthumb

RACEME
06-01-2007, 11:05 AM
I'll be dropping the drivers mirror off at cincy speed this afternoon

tangerinebeast
06-05-2007, 01:34 PM
i believe you are using my dads shop to get the drive shaft ? B&T shaft ?

89notch
06-05-2007, 01:39 PM
i believe you are using my dads shop to get the drive shaft ? B&T shaft ?

Yep thats correct I'm waiting on the final price

tangerinebeast
06-05-2007, 02:43 PM
That is great. I will be looking forward to workin on it somehow

quik lx
06-05-2007, 02:51 PM
I dropped all my trim off at plated's yesterday...car looks awesome! Get with me before you take it back north, I got alot of nice gray interior pieces laying around also.

89notch
06-07-2007, 05:19 PM
Torque converter is in

PaulFiveOh
06-07-2007, 05:25 PM
Kelly, My parents house is 2 seconds from B&T.....If needed, I can pick it up from them and drop it off along with the 6a box.

DeckerEnt
06-07-2007, 09:31 PM
From the pics, the car looks killer. I hope to see it in person one of these days. What else is needed? If I have it, you get it.
Keith

91lxnos
06-11-2007, 07:35 AM
Kelly, Is the radiator going to work for ya???? and is that the ring you needed??? I hope this helps........Doug:cool1:

89notch
06-11-2007, 07:40 AM
Raddiator should be fine I havent seen the ring yet I need to get the bellhousing from timido and double check it.

89notch
06-11-2007, 11:45 AM
WE NEED HELP GETTING THIS DONE. Talking baout it and getting it done is two different things. We cant look like ass clowns and not fucking show up. anyone that can help you let me know when and what you can help with and I will give you a key to my garage if I'm not home and access to all of my tools. I will make this happen some how some way but I can really need some help.

91lxnos
06-11-2007, 01:36 PM
is the car at your house yet????? Or does Chris still have it???????????

89notch
06-11-2007, 01:41 PM
Will be at my house by 5 today

Holly
06-11-2007, 02:02 PM
Will be at my house by 5 today


Are you the one who will be driving during the actual race?

89notch
06-11-2007, 02:15 PM
I think craig was going to drive it but not 100% he really hasnt said

craigels
06-11-2007, 02:27 PM
Will be at my house by 5 today


Matt left my house at about 2:00 with the trailer on his way to Chris' to get he car.


Craig

89notch
06-11-2007, 09:37 PM
Lots of progress

http://pic15.picturetrail.com/VOL591/4226507/16139878/259063906.jpg

http://pic15.picturetrail.com/VOL591/4226507/16139878/259063904.jpg
http://pic15.picturetrail.com/VOL591/4226507/16139878/259063903.jpg

Rearend out

http://pic15.picturetrail.com/VOL591/4226507/16139878/259063895.jpg
http://pic15.picturetrail.com/VOL591/4226507/16139878/259064312.jpg
http://pic15.picturetrail.com/VOL591/4226507/16139878/259064332.jpg

93hulk
06-11-2007, 10:00 PM
We got alot done tonight but have a TON left to do. Good seeing everyone today.:)

plated
06-11-2007, 10:31 PM
http://youtube.com/watch?v=E-Yq9wxNHXc

91lxnos
06-11-2007, 11:26 PM
Had a great time wrenching!!!! still a long way to go though, but we'll get there!!!!!
and Kelly thank the lovely lady for the burgers and stuff it was great!!!!!!

NXcoupe
06-13-2007, 07:13 PM
I'm glad UPR finally came through with the suspension stuff. I must have called them 30 or so times, finally got through to the owner and 4 days later, viola! Suspension! Already updated you on what I need for the engine. Should be coming together quickly. You need a long block to use to mock up the turbo kit?
Plated did an absolutely fantastic job on that car. It looks suhweet! Kudos to everyone lending a hand!

89notch
06-13-2007, 07:37 PM
I'm glad UPR finally came through with the suspension stuff. I must have called them 30 or so times, finally got through to the owner and 4 days later, viola! Suspension! Already updated you on what I need for the engine. Should be coming together quickly. You need a long block to use to mock up the turbo kit?
Plated did an absolutely fantastic job on that car. It looks suhweet! Kudos to everyone lending a hand!


yea but I will need the heads for it also

89notch
06-13-2007, 09:30 PM
Got some more done today. Timido came over and my little brother
WE got the rollcage painted
A arms on
K member bolted in
Upper and lower rear control arms in
Removed some things we didnt need
Figured out the fuel system and somewhat started on it
Hood pins mounted for the rear

Timido
06-13-2007, 10:38 PM
WE= Kelly handed the paint cans to His little brother. Carry right....

89notch
06-13-2007, 10:39 PM
WE= Kelly handed the paint cans to His little brother. Carry right....

Haha I gues I should have worded it better

93hulk
06-14-2007, 04:48 PM
Whos on for workin on the car tomarrow night? I know Ibstrokin, Badgoat455, and myself will be there.:)

5.0calypso93lx
06-14-2007, 05:45 PM
Whos on for workin on the car tomarrow night? I know Ibstrokin, Badgoat455, and myself will be there.:)

How late you guys gonna be up there mark, I could swing by when I get off work.

89notch
06-14-2007, 07:41 PM
We are going to start at 5 and work until we can get what we can done

Timido
06-14-2007, 10:18 PM
I am planning on loading some goodies up in my car to stop by after work.

DeckerEnt
06-14-2007, 10:29 PM
Wish I could come up to help but I am busy as hell at work and have family stuff going on. I did drop by cincy speed today and drop off some cash. If I can't donate time, then money will have to do.
Keith

91lxnos
06-14-2007, 10:34 PM
Friday???? This could work for me I'll call you Mark, while your out working in that HOT sun for some more details!!!!

89notch
06-15-2007, 11:47 PM
Lots of progress tonight had about 18 people helping thanks to the following sorry if I left someone out
91lxnos
Ibstroken
93hulk
bad455goat
gene
jonS
mailman
347sc
chad393na
qwklx
orangestang04
snotz135
aperacer
noslo50stang
Timido
my younger brother casey
And a few more I know I forgot


http://pic15.picturetrail.com/VOL591/4226507/15952753/259936865.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936860.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936858.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936852.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936846.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936843.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936841.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936839.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936835.jpg
http://pic15.picturetrail.com/VOL591/4226507/15952753/259936829.jpg

PaulFiveOh
06-15-2007, 11:57 PM
Hell Yea Buddy!!

mailman
06-16-2007, 12:07 AM
It was great meeting everyone.
Good times, free beers, and progress!

DeckerEnt
06-16-2007, 01:06 AM
Good to see a lot of us showed up to help. I am rooting for us in my own way. I would love to come up and help but I am busy as hell with work and family stuff. I feel like a fifth wheel sitting here just looking though.
Keith.

Greg Seibert
06-16-2007, 07:59 PM
Anyone order up a headlight set yet?

chad393na
06-17-2007, 02:33 AM
Good seeing familiar faces and meeting some new ones the other night! Definately no shortage of help! I'll get back over as soon as I can. Can't wait to see it at the track:D

BADVERT
06-17-2007, 10:44 PM
Coming together nicely, when is the next get together on it?

kathyp408
06-18-2007, 10:15 AM
i'm able to give an extra hand if needed.

det293
06-20-2007, 11:49 PM
Let me know when you need the fluids. I can either ship them or to help me out, maybe somebody could pick it all up at the Columbus distribution center. Anything I have to do watch the filming?

Steves LX
06-21-2007, 08:26 AM
Do you still need the drivers sider marker light? And when its time to get the fluids if you guys aren't wanting it to be shipped I can pick it all up. I make runs up to Columbus twice every week.

PonymanfiveO
06-24-2007, 05:49 PM
So how is it coming?????

Is the motor in it yet?
Take any pics yesterday?

I was planning on coming up yesterday but I had to play good boyfriend instead. I would have liked to came up today and worked on it but Kelly was at work and noone else was working on it. :(

PonymanfiveO
06-24-2007, 05:54 PM
Correct me if Im wrong, but this thing has to be done by Sat. July 14th right?

Thats less than three weeks to put a car together and get it running.
This car should be getting work done to it every single day between now and then!

It would be nice if we had a centralized location for this car so everyone had easier access to get there and help on it. I hope we dont end up praying for miracles at the last minute.

93hulk
06-24-2007, 07:19 PM
Well we got the trunk floor in, most of the fuel system ran, started mock up of the turbo kit, mounted the cell and battery box, mounted the fuel pump, and a few other odds and ends. Not a very big turn out there was only a few of us there. The motor will be done this week according to Mike. Jason the guy who does all my fab work will be over Wed. night to make the turbo kit. We are planning on working on the car Wed evening if anyone wants to lend a hand.:)

PonymanfiveO
06-24-2007, 08:26 PM
Id like to help more but I cant drive that far during the week. :(

Im glad to hear your doing as much as you have Mark.
Your good at this shit, I know you make everything work. ;)

mailman
06-24-2007, 08:37 PM
I was on my way down and had to turn around- a friend of mine was stranded in Columbus and I had to go rescue him. Sorry I did not make it!

pegasus
06-25-2007, 11:27 AM
Well we got the trunk floor in, most of the fuel system ran, started mock up of the turbo kit, mounted the cell and battery box, mounted the fuel pump, and a few other odds and ends. Not a very big turn out there was only a few of us there. The motor will be done this week according to Mike. Jason the guy who does all my fab work will be over Wed. night to make the turbo kit. We are planning on working on the car Wed evening if anyone wants to lend a hand.:)
I would like to help out where are you

93hulk
06-27-2007, 10:57 PM
Well we got alot done tonight. The fire wall is in, most of the interior, Power and ground cables ran, finished the fuel stuff, and some other stuff.


What is left is drop the motor and tans in, exhaust work, and wiring, and button up a few odd and ends. Thanks all that helped tonight.:)

aperacer
06-28-2007, 08:20 AM
sorry i did not get out last night. we had awards dinner for baseball for my boy. what is the next day/night to work on the car?

Timido
06-28-2007, 05:53 PM
Good times working on the car. Gene even got his hands dirty! There is lots going down with getting the car done. I plan on being there. Please check out the thread about parts needed for this project. You spare parts are very valuable to this project. To those who have donated time money and spare parts thank you very much.

http://www.stangbangerz.com/forums/showthread.php?t=29727

quik lx
06-28-2007, 07:54 PM
wish it wasn't over an hour away, so I could help more. Kelly, I'll give ya a call this weekend on a day to get the wiring done next week.

93hulk
07-02-2007, 10:48 PM
We got the new bullet in the PINKs car tonight. rscoupe (Mike) put together one sweet motor. Things should start coming along now. Thanks to James, Matt and Mike tonight for getting this one step closer to making some noise. Here is some pic of the motor.:bigthumb

NXcoupe
07-02-2007, 10:57 PM
I had a great time tonight. It will start coming together very quickly now. See ya tomorrow, I'll be putting the finishing touches on the engine tomorrow. Find out where that distributor is!

91lxnos
07-03-2007, 12:58 AM
Thanks Mike and all those @ Dayton 5.0 the motor looks great cant wait to hear it roar!!!!!!!!!!!!!

Qtr milerocket
07-03-2007, 02:58 AM
Had a great time last evening with Mike and Mark and also got to meet Ponyman50 (Matt), the car looks awesome and is coming along great, that engine looked awesome in the engine bay.......it's gonna be a monster! :bigthumb

Peace :cool2:

James

PonymanfiveO
07-03-2007, 07:46 AM
Thats what this car is all about, everyone getting to hang out and work together...its awesome!

It was great meeting you James, your right this thing is gonna be stupid fast!

Ima hafta bring some beer and Mt Dew next time.

NXcoupe
07-03-2007, 10:23 AM
I'm gonna bring a more traditional brew, Keystone Light! I will be there again tonight, got to get the valves adjusted and the rocker arms on.

Gregg@TFS
07-03-2007, 10:34 AM
That is a lot of pretty aluminum on top of that thing!!!!:bigthumb

Looks great guys!!! :rockon:

NXcoupe
07-03-2007, 11:13 AM
Gregg, I checked those heads out and you guys did a heck of a job on them. They are beautiful. I ported the intake to match the heads, and it matches up great.
I want to shout out to the people who helped out with this engine by donating time or parts:
TFS, of course, Probe for pistons, Cam motion for cam and lifters, Brian W and his friend for welding the return bung on with a moment's notice, and whoever donated the probe rockers and the oil pan, get with me so I can give you some props properly.
You guys helped make this happen!

Gregg@TFS
07-03-2007, 03:32 PM
Gregg, I checked those heads out and you guys did a heck of a job on them. They are beautiful. I ported the intake to match the heads, and it matches up great.
I want to shout out to the people who helped out with this engine by donating time or parts:
TFS, of course, Probe for pistons, Cam motion for cam and lifters, Brian W and his friend for welding the return bung on with a moment's notice, and whoever donated the probe rockers and the oil pan, get with me so I can give you some props properly.
You guys helped make this happen!

:bigthumb :bigthumb

347sc
07-03-2007, 03:59 PM
The rockers were more of my spare parts.Lol

NXcoupe
07-03-2007, 05:01 PM
Bo, thanks a bunch, those are a good set of rocker arms. I am putting them on tonight and adjusting the valves, since the pushrods came in.

plated
07-03-2007, 05:16 PM
fuckin A:bigthumb YOU GUY'S ARE ON IT!!! i'm coming out thursday night to help.

Timido
07-03-2007, 11:27 PM
I got to work with Mark and Mike tonight nice to see you guys out! We got some more stuff done I think Mark has some Tig work scheduled out for tomorow. There is a lot to do with the car and all the parts and help is very nice. We are starting to run accros some odds and ends we will be needing. Look into your used part bins boys and girls.

Valve cover gaskets
Thermostat housing
Waterpump
I am sure there will be more.
Fluids, Type F or Mercon about a case,
Oil 10-30 10 quarts
2 Oil filters Fl1a or what works.
Gear Lube 80-90 ish couple quarts
Pinion seal.

Thank you all again for your support Check the schedule for when they are working again. I think tomorow Wed the 4th work will be done.

Tim

Timido
07-04-2007, 09:40 PM
No pictures today but the headers were cut and will soon be Tigged up. The Intercooler is mounted. Tomorow we hope the flex plate is in so we can get the trans in. Keep at it. It is starting to become a Very Cool Car.

93hulk
07-04-2007, 10:12 PM
I guess it good that we are about out of parts to install, but we still need to get a bunch more stuff. Thanks to Jason Zimmers and Joe Banks for the awesome fab work today. Good luck this weekend Tim.:cool1:

Mr.Moontang
07-04-2007, 10:40 PM
I will work on the fluids...
Type F or Mercon about a case,
Oil 10-30 10 quarts
2 Oil filters Fl1a or what works.
Gear Lube 80-90 ish couple quarts

Chris (Plated) can you swing by the dealership and get these before you leave to go work on the car next?

tangerinebeast
07-04-2007, 10:44 PM
any word on the drive shaft guys ? i was talking to my dad about it today and he said no word from you on it yet


looks good on the progress though

89notch
07-05-2007, 01:21 AM
any word on the drive shaft guys ? i was talking to my dad about it today and he said no word from you on it yet


looks good on the progress though

I called a few times but I will try again tomorrow

NXcoupe
07-05-2007, 09:53 AM
Need to have the trans in first, then it can be measured. We need the flexplate before the trans can go in.

Timido
07-05-2007, 05:57 PM
Type F for the Fluid if you can get it if not Dextron-Mercon just not Mercon 5.

Thanks on the Luck. ;)

89notch
07-05-2007, 07:10 PM
We measured it with the old mock up motor with the trans in

93hulk
07-05-2007, 10:32 PM
We got a few more things tonight. Thanks Josh and Matt. Wait till you guys see this thing done!:bigthumb

PonymanfiveO
07-06-2007, 12:16 PM
I brought all the fluids up, Thanks Scott!

Nice meeting you Josh. ;)

BUHBYY
07-06-2007, 01:22 PM
Nice meeting you also Matt , we need some parts to get some sheeot done !!!

93hulk
07-08-2007, 07:29 PM
Update on the pinks car: the headers are all tigged up and look awesome the the exhaust is all tack welded and should be back on the car Tues. The shifter and cable are now on the car all the water pump and alt are on. Thats about all we could do today with the parts we have. Thanks Ibstrokin, 91LXNOS and Jason Zimmers for coming over today. I hope some more people step up this week and can lend a hand. All the parts that we are waiting for will be in Tues.

plated
07-08-2007, 07:40 PM
mark pm me when the parts are in,i hate to drive all the way out ther for pitty stuff,2hr drive there and back and work for a couple hrs is just a waste of time,just pm me i'll be out tue if the parts are in

91lxnos
07-08-2007, 08:45 PM
all is looking good, but there is still alote of work to do in 6 days!!! Hope everybody steps up It dosn't matter if all you do is push a broom to drive the car it all needs done! Mark maybe I make some more Beer Brats one nite this week while we work, you bring the buffalo dip that shit was goooooooood!!

Blk88GT
07-10-2007, 09:31 AM
Any updates? Pictures?

PaulFiveOh
07-10-2007, 08:14 PM
We have injectors! Yeh!

Qtr milerocket
07-10-2007, 10:11 PM
I was able to assist Timido in getting the transmission installed tonight all went well with no unforseen problems! :)

Peace :cool2:

James

Timido
07-10-2007, 10:52 PM
Thanks for stopping out James. I think that flexplate went from UPS Truck to the engine.

91lxnos
07-10-2007, 10:57 PM
I was able to assist Timido in getting the transmission installed tonight all went well with no unforseen problems! :)

Peace :cool2:

James

Damn James thanks for stepping up and helping Timido!!!!!!! I got called into work and wouldn't have made it there to help. 3 Days and counting TIC-TOC-TIC-TOC.............................:eek:

Qtr milerocket
07-10-2007, 11:13 PM
Thanks for stopping out James. I think that flexplate went from UPS Truck to the engine.




Damn James thanks for stepping up and helping Timido!!!!!!! I got called into work and wouldn't have made it there to help. 3 Days and counting TIC-TOC-TIC-TOC.............................:eek:

It's no problem guys, the pleasure was truly all mine to be of some help and a part of the Pinks Car in any way that I can! :bigthumb

Peace :cool2:

James

MRGRIMM
07-11-2007, 11:22 PM
If any tires/wheels need mounted and balanced (sticky or clips) for the PINKS car I or my co-worker Tommy can do them for free in Evendale any day this week except Sunday. A free alignment to your requested specs could probably be worked in as well, I just have to squeak it by the management but I'll take the blame...thats all I can really offer other than being available for a somewhat novice helping hand Thursday evening/night if any work is being done to the car.

PonymanfiveO
07-12-2007, 07:32 PM
:gotpics: :thanks:



:postpix:

93hulk
07-12-2007, 08:19 PM
:gotpics: :thanks:



:postpix:


Just wait well get some up. You know its got be on the down low!:bigthumb

89notch
07-13-2007, 09:37 AM
A pic

http://pic15.picturetrail.com/VOL591/4226507/15952753/265462575.jpg

If you want some engine pics give me an email address. And I will only send them to members over a year old with more than 200 posts. We dont want all of our cards out before we show up for the show.

plated
07-13-2007, 10:21 AM
awww,c'mon get us some more outside pics with the new shoes and hood on.:popcorn: i'm waiting:D

PonymanfiveO
07-13-2007, 11:24 AM
If you want some engine pics give me an email address. And I will only send them to members over a year old with more than 200 posts. We dont want all of our cards out before we show up for the show.



GOOD CALL! ;)

Holly
07-13-2007, 11:30 AM
A pic

http://pic15.picturetrail.com/VOL591/4226507/15952753/265462575.jpg

If you want some engine pics give me an email address. And I will only send them to members over a year old with more than 200 posts. We dont want all of our cards out before we show up for the show.


:agree:

Timido
07-13-2007, 04:40 PM
I hope the ole blown 289 gets it done.

Gregg@TFS
07-13-2007, 06:10 PM
:bigthumb :rockon: :rockon: :rockon:



GREAT JOB GUYS!!!!!

thejock60
07-15-2007, 07:33 PM
send me some pics please...... /me checks how many post i have

thejock60@yahoo.com

85_SS_302_Coupe
07-15-2007, 08:48 PM
I would love to have a few pics....you guys are doing a hell of a job, i wish i had more time/resources to contribute.

bluecollarnoose@yahoo.com

80 hate
07-16-2007, 12:12 AM
Do you know who you will be racing yet?

PonymanfiveO
07-16-2007, 12:50 AM
Got a lot done today. should be running real soon...cant wait!

I didnt get home till after midnight...blah.

PonymanfiveO
07-16-2007, 01:05 AM
Kelly's gonna kill me for this but...























heres an engine pic before we dropped it in...



























:D

http://pic40.picturetrail.com/VOL366/1161904/2195716/265949903.jpg

92BlackStang
07-16-2007, 01:39 AM
nice lol

Stangman
07-18-2007, 05:11 PM
:jawdrop: that cant be it... that thing has 4 turbos!!!

Timido
07-18-2007, 05:16 PM
That would have took a little while to weld all those pipes to those blowers !)

69Cobra
07-18-2007, 05:22 PM
DAYUM!!!

Now is the real engine carb or efi?

95redstang
07-18-2007, 05:27 PM
Damn that thing could power the space shuttle..

dedpedal
07-18-2007, 06:19 PM
It did power a Camaro and made over 2200 hp.

Timido
07-18-2007, 07:18 PM
The real engine is state of the art it is Carberated and has a dry shot of fuel only as a cheating device.

chuck
07-18-2007, 09:17 PM
It did power a Camaro and made over 2200 hp.

Yea kev, i think your right. isn't that Mike Moran...

PonymanfiveO
07-18-2007, 11:27 PM
Yea, that Mike guy was gonna donate it for the Pinks ride but we couldnt get it to fit. so were gonna run the "Duct Tape Supreme" that Timido is talking about.

It does have cool blue anodized Moroso valve covers and T-handle bolts though.
Should make it more intimidating...

NXcoupe
07-19-2007, 12:08 AM
Yep, that small block chevy was a bitch to get down in that mustang. The car kept rejecting the transplant.

RIXXX93GT
07-19-2007, 11:03 AM
Any updates guys? Has that thing had its first breath yet?

DSSKing68
07-20-2007, 06:31 AM
Are you working on the car this weekend?

Foxxx5oh
07-20-2007, 09:34 AM
pm sent Kelly!

Blk88GT
07-23-2007, 11:13 AM
When is the race?!

plated
07-23-2007, 01:33 PM
Yep, that small block chevy was a bitch to get down in that mustang. The car kept rejecting the transplant.so you did use that 327 out of the s10 does it still have the camel hump heads and 3/4 race cam,that edelbrock carbitrader ought to do the trick now;) i'll drop off the b&m shift kit later:lol: yee haw