Replacing Rear Main Seal w/Engine in car

[Katmandu]

Is this possible to do ?? :confused:

If so, how difficult is it to do ?? :confused:

[mustangrfast88]

need alittle more info on the car but if it is on a mustang it can be done because it is a one peice seal and you just got to drop the transmission and take off the flywheel or flexplate if i remeber right

[Katmandu]

need alittle more info on the car 91 GT 5.0. :bigthumb

[dedpedal]

Its simple but you do have to either drop the trans or at least move it back far enough to remove the flywheel and engine plate. Make sure to get a double lip seal for it.

[kennebellcobra]

Also make sure you seal the flywheel bolts or you will still have a leak. I always put blue locktite on the tip of the threads and black rtv towards the head.

[Katmandu]

Also make sure you seal the flywheel bolts or you will still have a leak. I always put blue locktite on the tip of the threads and black rtv towards the head.Good tips. :bigthumb

Thanks guys. :cool2:

[theyallslow]

it can be done and they made some very good point. its not hard to do. but good luck.