ported 1966" 289 C6OE heads w/goodies

[satan jamez]

1.84/1.60 valves
ARP 3/8 screw in studs
Comp Cams guideplates
Hardened locks
Crane .550 lift dual valve springs
port matched to 1250 and 15+ hours in bowl work done by me.
Less than 500 miles on these!
$300

http://img2.putfile.com/thumb/7/20321231734.jpg (http://www.putfile.com/pic.php?img=6080062)
http://img2.putfile.com/thumb/7/20321231817.jpg (http://www.putfile.com/pic.php?img=6080063)
http://img2.putfile.com/thumb/7/20321231864.jpg (http://www.putfile.com/pic.php?img=6080064)

[satan jamez]

These are good heads guys. I thought I blew a head gasket with them but after I removed the heads I found out that wasn't the problem. The head gaskets were perfect. I actually had too much water in the coolant causing the water to boil out the resivoir.

[satan jamez]

They also have been cc'd to 58cc chambers

[satan jamez]

SOLD Thanks Bangerz!