anyone have a pic of a stock height coupe?

[blk93notch]

looking for a pic of a fox body coupe with stock springs on 17's woth 245/45's. also a pic with one with 1.50-2 inch lowering springs would help. the reason is i just put new lowering springs on my coupe and im thinking that the company i got them from sent me stock replacements. thanks. if they really are lowering ones then i might try to go lower.

[one90gt]

There should be a part number on the springs. You could go to the manufacturer's website and check out exactly what you got.

[blk93notch]

no part number. i got the springs from laurel moutnain mustang. its there in house lowering kit. its progressive rate and suppose to lower it 1.5-2 inches. i even had to use spring compressors for the front. they were a gift from my girlfriend last year and since i had back problems and then works been busy since returning this is the first chance ive got to install them. if need be ill drive on them for a little them get different ones.

[331TwistedWedge]

these are intrax springs on my 91 coupe ... about a 2" drop ... you want a better than factory ride, i suggest these ... the wheels are 17's ~ hope this helps ...

[blk93notch]

yea that helps alot. ill drive my for a week or so and see if the springs settle but compared to your car im thinking my is at stock height.

[bobtsgt]

do you have the springs clocked right in the perches?

[blk93notch]

yea i made sure of that. thats the first thing that came to mind. i even double checked and read though different instruction from steeda springs and other springs also.

[WARNOTCH]

its got 275/40 on the rear and 235/45 on the front

http://i179.photobucket.com/albums/w297/redrum1357/20040709_0001_4-1.jpg

http://i179.photobucket.com/albums/w297/redrum1357/20040709_0001_1-1.jpg

[blk93notch]

mine is looking like street lx's.