Spec Stage 2 clutch F/S

[zspanker]

Used stage 2 spec clutch about 2000 miles, removed for a clutch with lighter pedal effort. I have no intentions of needing a clutch like this.

comes with pressure plate, clutch disk, and throw out bearing.

asking 150

in Georgetown ky
call 859 797 7326 jason

[zspanker]

sny serious offers . let me hear them.

[bobtsgt]

any pics? what size clutch and spline?

[zspanker]

I took it off a 91 coupe 5.0 with a tremek 3550 , and replaced it with a king cobra... I would say its a 10 1/2 what ever stock spline is.
and it looks brand new. the t/o bearing is alittle dusty but other than that i see no significant wear.. the new flywheel that was stuck on the car with this clutch looked practicly new, i could not feel or see any marks on the flywheel just a little cloudyness where i would say things where braking in.

If you are serious about the clutch i will try to send you some picts thurs evening. shoot me a address and i will snap some picts..

Its been off the car about two weeks and i wrapped it in a plastic bag.

thanks Jason

[92coupe]

If it was for a Tremec it's a 23 spline versus the 10-12 spline T-5

[bobtsgt]

I need a clutch for a T5 set up. If it will fit the splines of a T5 my email is bobtsgt@yahoo.com

[dawsin94cobra]

same. picks. dawson94cobra@aol.com

[5.0calypso93lx]

Tremec 3550's are still 10 spline, unless they have a 26 spline upgrade.

Bob, this clutch should work with your car.

[zspanker]

this is a 10 spline clutch i will send you picts later tonight

[zspanker]

any offers...........

[5.0calypso93lx]

PM'ed you. Can you verify this is a 10.5" clutch? Thats what I need as well as a 10 spline input.