I need a paint gun.

[Rick93coupe]

Hey guys, I need a paint gun for spraying some epoxy primer on my floorboards and undercarriage once the fab work is complete. Any recommendations? I haven't look anywhere yet for prices or anything. Thanks,
Rick

[NXcoupe]

Rick, you can use mine or go to Harbor freight and pick up an HVLP touch up gun for less than 40 bucks. I used one on my engine compartment and it turned out great. Not for professional use, but still did the job.

[Black Horse]

One word of warning on the HVLP guns - they eat a lot of air, small air compressors have a hard time keeping up.

[Maximus]

Harbor Freight FTW!!:)

[Foxxx5oh]

DeVilbiss FTMFW! i have 2 of their older siphon feed guns and they are GREAT!

[MFIELD]

You will need a gun with a pretty good size needle an seat if that primer is very heavy. You should be able to get a cheap one at Harbor freight good enough for shooting primer.

[NXcoupe]

Yeah, the one I got had two needle and hat assemblies. One for thicker and thinner materials.

[PonymanfiveO]

I spray my primer out of a Harbor Freight HVLP $20 gun. it has a 1.3 tip, so I just go a little heavy on the Reducer to thin it out a bit. works great. ;)

[mailman]

I have a Binks Model 7 and love the thing to death. It is a little pricey, but cough up the cash once and never have to think about it again, ever.

[Ryan218]

i got mine at habor freight...like 60 bucks what i used to spray my primer...