PDA

View Full Version : 36 lb/hr injectors


Mista Bone
10-05-2007, 11:51 PM
Did anything come from the factory with them?

I have a set (4) of 30 lb/hr Redtops but they won't be enough to run safely. They would be at 95-100% duration.

What about the 42 lb/hr?

I'll be running E85 which requires about 40% more fuel on my Honda build, 14:1 compression.

As you can see, Ford Injectors fit quite nicely after slight trimming.

http://i107.photobucket.com/albums/m307/bonespec/Honda/D16Z6/N2O%20tuneup/ford30_3.jpg

http://i107.photobucket.com/albums/m307/bonespec/Honda/D16Z6/N2O%20tuneup/FPR4.jpg

Piston sticks up slightly above the deck........

http://i107.photobucket.com/albums/m307/bonespec/Honda/D15Baby8/Part%205/PA150013.jpg
white01
10-06-2007, 08:58 PM
03-04 Cobras have 39# injectors stock. 99-04 SVT lightnings come with 42# injectors. Hopes this helps.

Rich
Mista Bone
10-08-2007, 01:30 AM
but those are the newer "skinny" style injectors right?
Mista Bone
10-08-2007, 01:48 AM
Assumming this guys info is correct, 87-88 XR4Ti 35# = brown tops.

An old buddy of mine in Oxford has two Merkurs :)

http://i6.ebayimg.com/01/i/000/ba/46/23a1_12.JPG
white01
10-09-2007, 09:40 PM
but those are the newer "skinny" style injectors right?

The 39# are the newer skinny style injectors but the 42# are green and are the same style as shown above.

Rich
Mista Bone
10-09-2007, 10:36 PM
Yeah, I ran into those, about the same as DSM 450 cc/min.......I need the hi imp. since I don't wanna wire in a resistor box (a honda thing)