T5 tranny bolts??

[bobtsgt]

Anybody know the length,thread,and pitch of the tranny bolts that mount a T5 to a 351w? I could measure but I'm lazy :D Should be the same as 302. Thanks

[Foxxx5oh]

if they are the same as the SVO i will check my spares in the morning...it had a T5 also too...

[Stangman]

SHOULD be something like a 7/16th x 18 course thread, shoulder-headed bolt, and like an inch and a half long, ill be going out to the garage in the next half hour or so, i can check whats on the back of my 302....

[bobtsgt]

thanks guys. I'm just lazy :D

[Stangman]

i got side tracked last night, a friend of mine came over to pick up a 2.3, so we had to dissassemble it first... ill check when i get home.

[Dirtyd0g]

The t5 bellhousing to transmission bolts if that is what you are talking about are generally metric. 12mmx1.75 IIRC but it could be 1.5 I have a couple here I use them for lifting modular engines because they are perfect for the threaded holes in the heads.
Alan

[bobtsgt]

No prob Jesse.

Yeah I'm talking about the tranny to block bolts.