PDA

View Full Version : Fix for leaky 8.8 c-clip eliminators



Jeff88coupe
10-24-2007, 09:04 PM
If you run Moser C-clip eliminators (will not work with strange C-clip eliminators) on 28 or 31 spline axles you can use a axle seal to keep them from leaking. It is Napa part #13988...about $12 a piece. I just installed them in my rearend housing tonight....look like they are gonna work great...fit like they were made for a 8.8 axle tube. I found this tip while searching around on the corral forums....few other guys that have tried it said it works for them also. Figured I'd pass it along.

bobtsgt
10-24-2007, 09:26 PM
thanks for the info Jeff. its the little things that can save you a bunch of time.

windsor86
02-05-2010, 01:34 AM
might starve the bearings of there fluid. could burn em up

Gearhead559
02-06-2010, 10:14 PM
might starve the bearings of there fluid. could burn em up

cant starve a sealed bearing....thats what the eliminators are for..they remove the open lubed cup style bearing with a sealed bearing pressed on the axle.:lol: