PDA

View Full Version : Anderson B4 blower cam-$100


ibstrokin
11-20-2007, 02:23 AM
This cam is in my car currently. It made max power @6000 rpm in my 331/twisted wedge/s-trim combo. Specs are 224/232 dur., .542/.563" lift, 112 lobe sep. $100
Katmandu
12-03-2007, 05:50 AM
This cam is in my car currently. It made max power @6000 rpm in my 331/twisted wedge/s-trim combo. Specs are 224/232 dur., .542/.563" lift, 112 lobe sep. $100How well would it work in a N/A GT40P headed engine ? :confused:
ibstrokin
12-03-2007, 08:13 PM
Probably too large, a better choice would be an anderson n series cam., Trick flow copied this cam, it is their stage 2.
Katmandu
12-03-2007, 08:52 PM
Probably too large, a better choice would be an anderson n series cam., Trick flow copied this cam, it is their stage 2.Ok. Thanks for the info. :bigthumb
ibstrokin
12-23-2007, 10:06 PM
Cam is now out of the car, still in great shape
ibstrokin
12-28-2007, 08:55 PM
bump bump
TONYT
12-31-2007, 05:34 PM
is 75.00 to much of a low ball offer
ibstrokin
12-31-2007, 06:30 PM
I'm easy, whenever you want to pick it up,lmk
ibstrokin
01-10-2008, 10:38 PM
Bump, still for sale, $75
PaulFiveOh
01-11-2008, 12:31 AM
How well would it work in a N/A GT40P headed engine ? :confused:

I actually run that cam in my current N/A setup (GT40 heads, GT40 upper lower, that cam, 30lb injectors, CAI, headers) and I can't turn enough RPMs to make the max available power. (Well, I can't safely turn enough rpms :D )
But! For that setup, it scoots, and it has a decent sounding idle.