PDA

View Full Version : Wiring for fuel pressure



vypastang
12-11-2007, 03:54 PM
i got a full electric sweep fuel pressure gauge that needs a 12v ignition source and im not sure which circuit to splice into? any suggestions??

dedpedal
12-11-2007, 04:04 PM
Just find one thats on with the engine and off when the engine is off. Id use a test light and probe the fuses till I found one with a heavier amp fuse. 20 is what I tied into.

quik lx
12-12-2007, 09:49 AM
Get you one of those "add a fuse" circuit adders from Advanced Auto and put it on any fuse in the fuse box that does not turn on your test light with the key off.:)

Blowpastyou
12-16-2007, 12:58 PM
Ide wire it into the aux. power for the radio, if your running an after market radio. The circuit is a 20amp i think and I know that aftermarket cd players dont draw that much. If you dont know, the aux. power wire on your radio will be the red wire.

vypastang
12-24-2007, 06:25 PM
im still using the stock radio so basically thats out of the question but thats the kind of answer i was lookin for thanks

Sharad
12-24-2007, 08:10 PM
yeah, I'd T-tap the ignition switched 12V+ behind the radio. If they're not choadmonkeys, a local stereo shop might help you with that.