View Full Version : Oil problems
Steves LX
01-19-2008, 07:58 PM
So does anyone know why I keep getting oil in my upper intake. I have a mini air filter that you would use for like an air compressor that is inline between the pcv valve and the upper intake and I still have oil laying in the upper all over the place. Its giving me blow by here and there. I am thinking about just blocking off my pcv valve and caping the vacum port that it goes to on the manifold. My oil cap on my valve cover is vented over to the throttle body. Any help would be appreciated.
rmracing
01-19-2008, 11:04 PM
I used to have the same problem . I just caped off my pcv and v/c hose . If you really want to keep the pcv , I believe steeda or someone has a kit that has a oil separater inline with the pcv .
mustang8998
01-20-2008, 03:18 PM
Yep, my Performer did the same thing. Not alot, but some oil in the intake.
PaulFiveOh
01-20-2008, 03:40 PM
I run it capped.
Timido
01-20-2008, 09:01 PM
You intake pcv screen may be clogged up also. You could try replacing it.
kennebellcobra
01-20-2008, 10:10 PM
This is a fix for the cobra intake. I also think most aftermarkets don't have a baffle...not sure about the edelbrock. http://www.corral.net/forums/showthread.php?t=985943&highlight=cobra+intake+baffle
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.