My new project "2-Tone Terror"

[93hulk]

That's awesome Mark. Maybe next Sunday if I'm in the area I can stop by and check it out. I work Sundays and am usually working in Franklin-Carlisle area.

Hell yeah stop by anytime..

[Kwik92GT]

Cool Mark:bigthumb Can't wait to see you back on the road! Now, if only we could get some of the other mafia members back in action that would be nice!

May be sooner for some of us than most realize. :bigthumb

[93hulk]

May be sooner for some of us than most realize. :bigthumb

How about an update then?:D

[cobra429boss]

Good work on the car mark..

[poncho2001]

Hell yeah stop by anytime..

:bigthumb

[67fastback]

its about there buddy im ready to see that thing hit the streets :bigthumb

[93hulk]

its about there buddy im ready to see that thing hit the streets :bigthumb


Thanks for hauling me up To Mike to get my drag radials mounted.:)

[NXcoupe]

Congrats Mark!

[93hulk]

Congrats Mark!

Thanks Mike! Im waiting on my exhaust to get done and I have a few thing to pick up this Friday. Hope to find some time to get back out in to the garage but I havent had a day off in 3 weeks and wont for 3 more. But Im super lucky to be getting some over time at this time of the year.:)

[mb88coupe]

car looks gooood!!!

[SLWB16hatch]

what kind of boost controller are you running mark?

[5.0Greaser]

Man that looks sicks...Thumbs way up to you..Cant wait to see this terror on the streets.

[zlou363lx]

what intercooler is that?

[93hulk]

what intercooler is that?

VS Racing.

[zlou363lx]

thank you lol.

still waiting on the cold side?

[93hulk]

thank you lol.

still waiting on the cold side?


No I have it, I just have not have any time to work on it. I might get out there tomarrow.

[facemelter71]

Would you be able to do me a huge favor.
Can you tell me how you bolted that small bracket on the alternator at the top where the turnbucke bolts to.
Did you find bolts that actually fit the small bracket and just bolted it to the alt' or did you just run bolts through it and put a nut on the backside of the bracket.
Any info would be aweome.
Sweet freakin car man.
And how did you fill the side moulding? I like that very clean look.

[beefcake]

looking good!

[93hulk]

Would you be able to do me a huge favor.
Can you tell me how you bolted that small bracket on the alternator at the top where the turnbucke bolts to.
Did you find bolts that actually fit the small bracket and just bolted it to the alt' or did you just run bolts through it and put a nut on the backside of the bracket.
Any info would be aweome.
Sweet freakin car man.
And how did you fill the side moulding? I like that very clean look.

Yeah I just ran bolts through the alt bracket put a nut on the back side. The moldings were smoothed with fiberglass. Thanks for the compliments.:)

[93hulk]

I know have been slacking on the updates and pics but this how it sits right now.

This is a front end shot, you can see the intercooler and to the left of the pic you can see the Blow off valve.

http://i189.photobucket.com/albums/z222/93hulk/DSC02337.jpg

Here is the finished product in the engine bay.

http://i189.photobucket.com/albums/z222/93hulk/DSC02338.jpg

Here my 275/40/17 M/T drag radials mounted and back on the car.

http://i189.photobucket.com/albums/z222/93hulk/DSC02340.jpg

I still have some minor things to do but IT WILL BE DONE THIS COMING WEEK! I havent had a day off in about 7 weeks but have some time off in the next few days. :)

[CNTLOSE]

Looks great Mark!

[bbfstanger]

lookin good man.

[Blowpastyou]

hell yea....must be nice...

[mustangboy]

I think it looks like crap and I bet it will run like crap too. I just had to be different.

[Maximus]

I think it looks like crap and I bet it will run like crap too. I just had to be different.

:lol::lol: Dick!:flipoff:

[93hulk]

I think it looks like crap and I bet it will run like crap too. I just had to be different.


Thanks for the kind words and support.:flipoff:

[mustangboy]

Thanks for the kind words and support

Anytime, thats what I'm here for.

[91lxnos]

Car looks sweet Mark I will have to stop by and see it in person.

[5.0calypso93lx]

Haha looks good man. I'm diggin' the tails too.

What's the sizing on the intercooloer? Did you have to cut anything to make it fit behind the stock bumper?

[ibstrokin]

I hear this thing is making progress.

[93hulk]

Yeah its running. I havent updated it in a while due to chasing my tale around trying to figure out why I couldnt get it running right. I one call down to Cincy, and Adam had me a base tune ready. I put the chip in and boom it ran fine. (kind of sucks cause I wish I did that a month go).So tomarrow I plan on taking it out for a drive and see how i does. Thanks to all the guys a Cincy for the help. I cant wait to see how it does on the rollers.

[1byafender]

Where u been buddy. Any updates.

[93hulk]

Where u been buddy. Any updates.


I havent touched it. All I need is to get it tuned but with the holidays coming up it will have to wait. Im prob going to make some changes over the winter. Like tubular front suspen and some better heads.

[93hulk]

I havent done much with my cars in quite some time but I plan on having them both out this year. As far as the coupe I did install a set of smoked clear head lights in it the other day and it looks way better. Ill get a pic tomarrow.

[Adam@S&MMotorsports]

Glad I could help Mark let me know when you need that tune !

[93hulk]

Got the T-rex pump installed last night and the piece of shit chrome water neck switched. I think Im ready to spin some rollers hear in the REAL near future. Any H/P guesses? 306, GT-40's, X-cam, a GT-45 Turbo and all the supporting bolt ons. I think Ill meet my initial goal of this car this year (Read post #1 page 1)

[Maximus]

4:10s??? YIKES!!:eek:

[mustangboy]

Bout damn time

[dsmawd350]

damn you'r running 4.10's in a turbo car and with a 3 speed

[dsmawd350]

also you going to be on pump gas? if so that'll be your first limit so it'll make whatever you can on pump safely

[93hulk]

4:10s??? YIKES!!:eek:

LOL!!!!! No it has 327's in it now. Yeah 93 octane, 60lb injectors, boost ref regulator, Forced induction pump, t-rex pump. :lol:

[Walter]

What do you think it will make Mark?

[93hulk]

What do you think it will make Mark?

I guess it realy depends on how hard I want to turn that little nob under the hood. But realy Im thinking 500ish. Thats what I want 500rwhp and run 10's with full interior and 17 drag radials (no cage). Ive been doing this turbo thing for quite some time but my concern with this combo is how cheap Ive put it together. I built the motor out of spare parts I had and alot of feebies from a lot of friends. Ill do a break down of how much cash I have in this car after I see it stay together on the Dyno.:)

[bbfstanger]

525hp should be obtainable,is that the kit from kelly's bro?

[Walter]

I guess it realy depends on how hard I want to turn that little nob under the hood. But realy Im thinking 500ish. Thats what I want 500rwhp and run 10's with full interior and 17 drag radials (no cage). Ive been doing this turbo thing for quite some time but my concern with this combo is how cheap Ive put it together. I built the motor out of spare parts I had and alot of feebies from a lot of friends. Ill do a break down of how much cash I have in this car after I see it stay together on the Dyno.:)

You will def achieve those goals. :bigthumb

[Maximus]

LOL!!!!! No it has 327's in it now. Yeah 93 octane, 60lb injectors, boost ref regulator, Forced induction pump, t-rex pump. :lol:

Whew!! Cant wait to see the video! :bigthumb

[93hulk]

525hp should be obtainable,is that the kit from kelly's bro?

yeah thats the kit.

[93hulk]

Here is a couple pics of the new smoked head lights which I think look much better than the clears I had.
http://i189.photobucket.com/albums/z222/93hulk/DSC02567.jpg
http://i189.photobucket.com/albums/z222/93hulk/DSC02568.jpg

[Rick93coupe]

Looks real good Mark!

[mustang8998]

Looks real good Mark!

Yes it do! :bigthumb

Mark, I thought you were going to make that accent stripe, a little brighter?