help please

[brncoupe5.0]

I installed moroso drag springs in my coupe and now it sets really low, is this acceptable please help

[kevin23]

that's odd,I have used these a few times before and have had to cut a coil off of them to sit at stock height.
if you got these used,are you sure they aren't cut?

[MFIELD]

X 2 Mine were the same way. much to tall

[brncoupe5.0]

There are used my bro inlaw gave them to me,Whats the best height to run for drag racing Whats ideal height I have 90/10s and 50/50 inrear should I remove my rear sway bar This car wont hook Thankls Fellas

[mustangboy]

Never remove the rear sway bar. You can remove the front one which will help the front to rise and trasfer traction to the rear. What kind of tires are you using and what is the condition of your upper and lowers as well as the housing bushings for the uppers.

[BIZLE]

i have ran into this before buying springs at the swap meet
ive used coils spring boosters from auto zone in the past
sound cheap but they work well and they just twist between the coils springs
with a 1/2 ratchet and extension
they will raise the ride height a little

[brncoupe5.0]

I have mac upper and lowers,and will the extension come out when I launch,What will make my car launch

[BIZLE]

you use the extension to install the coil spring boosters.
what tires?

[brncoupe5.0]

Bfg 275/50/15

[brncoupe5.0]

What height should I run in the front

[BIZLE]

i dont have any preference on how high.

[brncoupe5.0]

With It riding low will this cause my hooking issue

[BIZLE]

i have had slammed cars that would like crazy
i would check to see how much bounce you have in the front end
maby you have a set of locked up 90/10?
check your front lower control arm bushings
disco the front sway bar

[brncoupe5.0]

Thanks for the help