PDA

View Full Version : t-5 to c-4 set up



92BlackStang
03-01-2008, 11:52 PM
goin ahead and changin the car over to c4 what all do i need, Dont even know where to start or what to look for.. any help is apprieciated. :bigthumb

PaulFiveOh
03-02-2008, 12:52 AM
89Notch and Transman would be good resources.

Blowpastyou
03-02-2008, 10:41 AM
You can re-use your cross member, you just have to cut the spot welds and move it back about 1 inch and re weld it. You can re-use the driveshaft. And I'll give you a tip, Put the tranny cooler lines on before you put the tranny all the way up in the tunnel. It will make your life alot easier!

92BlackStang
03-02-2008, 11:35 AM
Thanks for the advice i plan on starting this sometime soon.

92BlackStang
03-02-2008, 12:43 PM
me and kelly are friends i havent seen him in awhile looks like im gonna have to go over and see him.

PaulFiveOh
03-02-2008, 03:39 PM
me and kelly are friends i havent seen him in awhile looks like im gonna have to go over and see him.

Do it! He is in Florida until Friday fyi.

92BlackStang
03-02-2008, 03:45 PM
Do it! He is in Florida until Friday fyi. i got a few other buddys that would help or point me in the right direction i was just seein whats the easiest way to go and cheapest

PaulFiveOh
03-02-2008, 04:48 PM
Kelly is dropping my T5 for a built C4, I know that the clutch safety switch has to be circumvented as well.

Edit - Kelly all ready got back this Friday....shows how much I pay attention!

PaulFiveOh
03-02-2008, 04:57 PM
i got a few other buddys that would help or point me in the right direction i was just seein whats the easiest way to go and cheapest

Got ya. He is actually back, I had my weeks messed up, infact I'm dropping my car off to him Monday Afternoon.

89notch
03-02-2008, 05:05 PM
i made it back today justgive me a call ill help you with whatever i will be starting pauls tomorrow 937 790 0516

92BlackStang
03-02-2008, 05:34 PM
Thanks kelly

347sc
03-02-2008, 08:06 PM
Yeah started to say I just talked to him alittle bit ago

92BlackStang
03-03-2008, 02:54 AM
I say this would be a good learning thread, Ok boys first of all what do i need to look for when buying one which ones are better wheres a good place to buy..

92BlackStang
03-03-2008, 02:55 AM
i have to have the parts befor i can start the swap so what all do i need and what do i need to look for.

PaulFiveOh
03-03-2008, 08:22 AM
Buy a C4 that Transman has all ready put clutches and bands in.