what heads

[JamesjGT]

I'm getting ready to build a 347 and wanted to know what is the difference in the Non O ringed and O-ringed.

I have a Trick Flow R Series upper and lower and wanted to buy either the Trick Flow R series heads or there CNC high ported heads.

Anyone tell me what would be the best Trick Flow heads to buy?

[JamesjGT]

Or would AFR 205 be better?

[5.0calypso93lx]

Is this going to be N/A? If so, I would think the Trick Flow R head is WAY too much cylinder head. For your combo, I would say some ported Twisted Wedges or some AFR 185's would be best.

[JamesjGT]

I was gonna buy the DSS super pro bullet block this winter and wanted to get parts here and there so I can build it all this winter. I just wanted some good idea's of what would be the best for that setup.

[5.0calypso93lx]

I was gonna buy the DSS super pro bullet block this winter and wanted to get parts here and there so I can build it all this winter. I just wanted some good idea's of what would be the best for that setup.

I think a good place to do some research is over on hardcore50.com . Seems like a very knowledgeable group over there. Most guys running TFS R heads, and AFR 205's, 225's, and high ports have big inch strokers. It all depends though, there are so many factors.

[facemelter71]

I would call over to DSS and get there opinion on what heads they would recommend and go from there.

[JamesjGT]

I called them and going with AFR-205