STEVE_POE
05-20-2008, 09:21 AM
ford 331 refreshed by http://www.blueovalclassics.com in Kingsport TN. aka: beau devaunt with Nasa
345 rwhp and 375 rwtq. a couple quick pulls when I got the car from Rick Mcnutt before taking the car apart.
mexican block
eagle crank and rods,molly pistons. all the other good little stuff in the bottom end
canton road race pan
mm solid engine mounts
lightweight flywheel and aftermarket balancer with brand new mccloud clutch
afr 185 heads with fera 6000 valves. jessell rockers and beehive valve springs
crane tri retrofit roller lifters
special grind comp cams " have cam card"
msd pro -billett dist msd-8455 for 94/95 style mustang electronics
bbk long tubes, x -pipe with bullett style mufflers and turn downs
underdrive pullys with new belt and new alternator, starter and misc wires for installation
mm power steering kit
intake 94/95 motorsport intake or I have a brand new fox style rpm 2 intake. upper and lower."choice"[/list]
30 pound injectors, maf meter ,adjustable regulator
I'm sure I'm missing a few small things but you get the picture.... for more information my e-mail is Steve_poe@yahoo.com. it's located in Cincinnati Ohio. delivery or shipping is a possibility but prefer pick up.
http://pic50.picturetrail.com/VOL1632/7317501/19716264/318031577.jpg
345 rwhp and 375 rwtq. a couple quick pulls when I got the car from Rick Mcnutt before taking the car apart.
mexican block
eagle crank and rods,molly pistons. all the other good little stuff in the bottom end
canton road race pan
mm solid engine mounts
lightweight flywheel and aftermarket balancer with brand new mccloud clutch
afr 185 heads with fera 6000 valves. jessell rockers and beehive valve springs
crane tri retrofit roller lifters
special grind comp cams " have cam card"
msd pro -billett dist msd-8455 for 94/95 style mustang electronics
bbk long tubes, x -pipe with bullett style mufflers and turn downs
underdrive pullys with new belt and new alternator, starter and misc wires for installation
mm power steering kit
intake 94/95 motorsport intake or I have a brand new fox style rpm 2 intake. upper and lower."choice"[/list]
30 pound injectors, maf meter ,adjustable regulator
I'm sure I'm missing a few small things but you get the picture.... for more information my e-mail is Steve_poe@yahoo.com. it's located in Cincinnati Ohio. delivery or shipping is a possibility but prefer pick up.
http://pic50.picturetrail.com/VOL1632/7317501/19716264/318031577.jpg