need fuel injection advice

[mustangrfast88]

ok guys and gals here is the deal i got a build 306 specs to follow but it has a edelbrock victor jr 302 intake and a 750 carb on it but i am going to be putting it in a fuel injected convertible and i need advice on what stuff to use

i am going to run stock stuff on it just to get it running when i pull motor out and drop it in vert but need to know what all i need to buy to get the most out of this engine with going fuel injected.

specs on motor are 302 bored .30, 10/10 crank, stock rods, kb 11.5 to 1 pistions, x cam, edelbrock victor jr heads, mac long tubes, mac prochamber, mac cat back sytem, i just need to know what intake, injectors, fuel pump, and what other stuff i will need

i am a fan of edelbrock stuff

thanks for the advice im new to the making power game with fuel injection

[89notch]

Put a Victor 5.0 intake on it or a trick flow R series would work nice.

[mustangrfast88]

cool i was looking at that edelbrock intakes but the injectors and stuff is what i have no clue on and how much is the stock stuff gonna kill the motor tell i can get the good stuff

[89notch]

It will be lean I'm sure on 19lb injectors you should be able to pick up 30lb injectors and a meter for around 300.00

[mustangrfast88]

ok sounds good so 30 will be big enough i will have to keep eye out for some but im thinking its gonna be a winter project to switch motors over but i want to try to have everything ready and make it a weekend swap

[Sharad]

walbro 255 fuel pump will work. You can generally pick them up for around $100-120 depending on where you shop.

[mustangrfast88]

how much horsepower will a 255 support and is a 255 the biggest made for stock replacement intank

[mustangrfast88]

so i need 255 intank pump, 30-42 pound injectors, mass air meter calibrated, what about fuel rails and regulator and gauge, and anything eles might need

[mustangrfast88]

well im looking at the 255 pump
36 pound injectors
stock fuel rails
mass air meter for 36 pound injectors
a edelbrock rpm 2 or a victor intake i still want to make this thing streetable it is going into a convertible
adjustable fuel pressure regulator
i think thats all

then going to cincy speed

[12seclx]

I think you can get a 255lph pump from jazzproparts.com for 100-105 shipped to your door... Might want to check that out... :cool1:

[mustangrfast88]

i will support the local speed shop cincy speed is where my bro got his and thats where i will get all my stuff craig does me right

mmy bro is ready to do the swap and i think a fuel pump is holding me up because all the other stock stuff is going on motor to get it running then some base dyno runs then the aftermarket stuff will come over winter