Need Some Help Fellas!

[93bossgt]

i need some advice. I'm in the middle of eliminating my air conditioning, and i am going to go ahead and eliminate the smog pump while i'm at it. So, here's my scenario; what do i need to do to eliminate this pump? It doesn't look to be too bad to eliminate but, not sure so that;s why i'm asking. Any advice will be great.

[mustangjon]

http://www.cjponyparts.com/NewTech50Belts.aspx

either buy the smog delete setup to make it and idler, or do as i did and route around it, here is a belt routing chart for most all setups on a 5.0, and all the smog crap prolly weighs 35lbs or more.

[93bossgt]

well, i've already taken the pump off, and i'm not positive but don't the air tubes go into the back of the heads?

[93bossgt]

who sells the smog pump delete kit? i didn't see it in Steeda's catalog.

[mustangjon]

well, i've already taken the pump off, and i'm not positive but don't the air tubes go into the back of the heads?

put plugs in them i dont recall the thread, 3/8npt? maybe, shit i dunno someone will chime in im too exhausted, speaking of which i gotta finish my intake porting.

Your good as long as ky doesnt implement emissions testing
:eek:

[one90gt]

the plugs that go into the back of the heads are called thermactor plugs. i bought mine from trickflow but i think they sell them at napa too. shouldnt be more than about 5 bucks a piece.

[93bossgt]

what about the air tube on the h-pipe? what do i do about that?

[mustangjon]

bend it over/crimp it off, weld a cap on it ect, whatever really

[DeckerEnt]

the plugs that go into the back of the heads are called thermactor plugs. i bought mine from trickflow but i think they sell them at napa too. shouldnt be more than about 5 bucks a piece.

I just stopped in at airport ford in florence and got their last 2. 17.xx each. WOW. Didn't expect that. I also got the one off the stud that came out of the head in the front. I put a new one in the front but the rear was a little tricky. Where the pipes connect, the holes were full of carbon deposits. I mean Full!! I used a battery terminal wire cleaner and just spun it till I saw threads. I tried brake cleaner but it seemed to come out better dry. The 2 new ones had some sort of thread sealer on them. I used some silicone on the old one. They did bottom out in the head. You won't think they will but they will.
My motor is on a stand so it was cake. Doing this in the car is going to be a bitch. Good luck.
Keith

[Stangman]

Thats why I just use GT40P's :D

[mustangjon]

http://forums.corral.net/forums/showthread.php?t=1053190

there is a smog pump eliminator setup for sale if you want to do it that way.

[93bossgt]

what's the difference in stock 302 heads and GT40P's? I don't know that's why i'm asking.

[mustangjon]

stock should be e7's on yours, the gt40's outflow them and the p's have a centerd combustion chamber, but the plugs go straight out instead of angled to accomplish that, so you need "P" specific headers. e7's are horribly restrictive in stock form

[Stangman]

AND GT40P's have NO smog bullcrap on the front/back of the heads.