Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
331 ENGINE AND TREMEC 6SPD [Archive] - StangBangerz Forums

PDA

View Full Version : 331 ENGINE AND TREMEC 6SPD



STEVE_POE
10-06-2008, 09:12 AM
Engine /Trans is located in Cincinnati Ohio. I will not seperate unless I have a buyer for both.

CONTACT : steve_poe@yahoo.com for more information.

$5,900 AS PACKAGE. May consider a trade for a enclosed car trailer.

MOTOR $4,600.00
TRANS $1750.00

1ST , The engine

Ford 331 refreshed by http://www.blueovalclassics.com" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; in Kingsport TN. aka: beau devaunt with Nasa
345 rwhp and 375 rwtq. a couple pulls "with stock 95 cobra intake"

mexican block
eagle crank and rods,molly pistons. all the other good little stuff in the bottom end
canton road race pan
lightweight flywheel and aftermarket balancer with brand new mccloud clutch
afr 185 heads with fera 6000 valves. jessell rockers and beehive valve springs
crane tri retrofit roller lifters
special grind comp cams " have cam card"
msd pro -billett dist msd-8455 for 94/95 style mustang electronics
underdrive pullys with new belt and new alternator, starter n
mm power steering kit
rpm 2 intake. upper and lower
30 pound injectors, maf meter ,adjustable regulator 70 mm tb

engine pics:
http://pic50.picturetrail.com/VOL1632/7317501/20672182/337528932.jpg

http://pic50.picturetrail.com/VOL1632/7317501/20672182/337528958.jpg

Transmission :

From d&d performance model number : 1386-000-012 450 torque 1st 2.97 2nd 2.07 3rd 1.43 4th 1.0 5th .8 6th .62
trans has about 5 thousand street miles on it. excellent condition comes with shifter and 6 sp ball and modified driveshaft for fox /sn95 install

http://pic50.picturetrail.com/VOL1632/7317501/20672182/337528986.jpg



I'm sure I'm missing a few small things but you get the picture.... for more information my e-mail is Steve_poe@yahoo.com. it's located in Cincinnati Ohio.

5.0calypso93lx
10-06-2008, 10:14 AM
If that trans comes with the bellhousing, midplate and driveshaft for a 5.0/5.8 that is an awesome price. Wish I was in a better position to buy :(

leroy93lx
10-07-2008, 02:57 AM
Would that engines compression be boost friendly? Also, is that tranny set up basically plug and play in a foxbody, or do other mods need to be done?

STEVE_POE
10-07-2008, 08:26 AM
10.5 to 1 I doubt it. it was built to be NA . As for the trans. yes plus and play