PDA

View Full Version : What fox parts work on a 94?



WARMACHINE
11-14-2008, 08:04 PM
What Fox Mustang parts if any, will also work on a 1994 mustang?

Goober
11-14-2008, 10:17 PM
Off the top of my head

throttle body (unless a fox tb conversion is done)
MAF will not "bolt on" without mods, but it will work
Shorty headers will, if you block off the EGR port in the passenger side header and intake manifold
Nothing on the front drive will work, well, possibly the alternator
Flywheel, clutch, driveshaft carries over as long as they have the same trans

A whole bunch of stuff will carry over. What were you wondering about?

WARMACHINE
11-15-2008, 12:41 AM
Off the top of my head

throttle body (unless a fox tb conversion is done)
MAF will not "bolt on" without mods, but it will work
Shorty headers will, if you block off the EGR port in the passenger side header and intake manifold
Nothing on the front drive will work, well, possibly the alternator
Flywheel, clutch, driveshaft carries over as long as they have the same trans

A whole bunch of stuff will carry over. What were you wondering about?

Steering rack, radiator.,suspension, Stuff like that.

ohiofordfan
12-14-2008, 09:53 PM
what about h-pipes or x-pipe for long tube headers?