long tube headers and H pipe

[Barger]

I was trying to figure out if long tube headers and the H pipe off a 302 would fit on a 351 windsor,thanks

[smoker]

the headers should bolt up but the taller deck height making the engine wider across the top will affect it somewhat. i dont know if it will raise everything enough to create clearance issues though

[facemelter71]

You would need the specific 351W headers to go in a fox.They make them.Unless you can rig some thing up.

[Stangman]

I always thought finding longtubes for a 351 in a fox was difficult?

You could always lower the K-member an inch and a half with some spacers and then run a stock hood and longtubes so they don't hit the steering shaft. Nobody'd even know it was a 351

[smoker]

im thinking if nothing else, the headers will be slightly farther apart under the car and the h pipe wont fit

[facemelter71]

They would ahve a problem of not being lined up underneath.The 351 has a taller deck height.Your headers would sit higher.

[Barger]

gotcha, thanks guys for the information,thats what i needed to know

[NUTTSGT]

They would ahve a problem of not being lined up underneath.The 351 has a taller deck height.Your headers would sit higher.

They should hit higher under the car, probably hitting the flooor pan.