PDA

View Full Version : 5 lug disc brake conversion,front/rear


ClevelandMstang
01-05-2009, 07:32 PM
I have 5 lug brake parts here, from a 96 Mustang.

Front, spindles/hubs, rotors, calipers, rubber hoses 160.00

Rear, axles,rotors,calipers,all brackets, 200.00

Master cylinder and booster 40.00
some rust from being a daily driver ini Ohio..I drove the car, parts work fine.

Pick up or +++ shipping
ClevelandMstang
01-25-2009, 12:22 PM
Still have the rears...
Ryan218
02-01-2009, 03:42 PM
Pm me pics of the front 5 lug. also. need anyting else or whould this basically be just like put the 94-95 stuff on?
ClevelandMstang
02-01-2009, 11:01 PM
FRonts are gone..

Pic of rears if anyone has interest
http://i36.photobucket.com/albums/e41/86lxmustang/100_9000.jpg
Ryan218
02-01-2009, 11:53 PM
i have ranger axles. can i still use whats pictured minus the axles?
ClevelandMstang
02-02-2009, 06:00 PM
i have ranger axles. can i still use whats pictured minus the axles?

Yes, you will need to space the caliper mounts some, I think a friend did it with a thick washer.
Ryan218
02-02-2009, 06:11 PM
Yes, you will need to space the caliper mounts some, I think a friend did it with a thick washer.

how would i got about with brake lines? if i can get some information on how to do this i will come and get them when i get paid. you can pm me or post here. whatever works best for you, thanks!!
ClevelandMstang
02-02-2009, 07:10 PM
Buy lines at Auto zone and bend them up, very easy to do.
88ssp
02-02-2009, 09:07 PM
Ryan, classic tube sells the hardlines for this swap for 38-42 dollars. I'm getting them. Also, for the fox length axles, you will need to get North Race Cars mounting plates for the V6-GT--not the Cobras.
Ryan218
02-03-2009, 03:48 PM
Ryan, classic tube sells the hardlines for this swap for 38-42 dollars. I'm getting them. Also, for the fox length axles, you will need to get North Race Cars mounting plates for the V6-GT--not the Cobras.

my buddy has a set of turbo coupe ones. could i just cut and re weld them where needed?
ClevelandMstang
02-03-2009, 04:26 PM
my buddy has a set of turbo coupe ones. could i just cut and re weld them where needed?

I think it is as simple as just using those.
Ryan218
02-03-2009, 05:06 PM
I think it is as simple as just using those.

he put a turbocoupe rear end in his fox GT and had to get the north cal brackets? with sn95 brakesa re you just able to use the turbo coupe ones?
ClevelandMstang
02-03-2009, 05:34 PM
he put a turbocoupe rear end in his fox GT and had to get the north cal brackets? with sn95 brakesa re you just able to use the turbo coupe ones?

you may need the fox style brackets, but like I said, a friend said something about spacing his TC brackets when converting
ClevelandMstang
02-07-2009, 08:23 AM
Want to sell!
ClevelandMstang
02-20-2009, 12:26 AM
Still here..