1.7 pedastal mount rollers need 1.6

[kennebellcobra]

I was checking piston to valve clearance and came up a little short so I would really like to just swap if someone has 1.6 rollers....if not I'll sell them for 150.00 OBO...they are in great shape!

[12seclx]

:screwy:

[kennebellcobra]

:screwy:

After porting the heads I cc'ed them and came up with 66 cc's so I had .040 cut off them so I did'nt have 8.5:1 compression:lol: I think that is why:tongue2:

[12seclx]

After porting the heads I cc'ed them and came up with 66 cc's so I had .040 cut off them so I did'nt have 8.5:1 compression:lol: I think that is why:tongue2:

I only have 9.38 : 1.... :cool2:.........;)

[kennebellcobra]

I only have 9.38 : 1.... :cool2:.........;)

That may be the reason your car is sloooooooooooooooooooow! Bahahahahaha

[leroy93lx]

I have a set of 1.6s with about 15 minutes of run time on them. I think they are FMS. They are bright blue aluminum rockers.

[kennebellcobra]

I have a set of 1.6s with about 15 minutes of run time on them. I think they are FMS. They are bright blue aluminum rockers.

Thanks for the offer but I no longer need them.