massive sale

[Flaming87lx]

Alum SVO CJ heads, Manley titanium valves, comp solid roller springs to .750 lift. Unported but has bowls blended, milled for flatness and competition valve job. Professionally set up. $3500.00+ invested, $2000.00 shipped to lower 48, paypal ADD 3%

-BBF Stealth intake, perfect, looks brand new. $175.00 plus shipping

-Crane Gold Quick lock Rocker arm Stud girdle with poly locks 50 passes $410 new, $200.00 plus shipping

-BBF Comp cam and roller lifters .728 & .728 lift .308 & .318 dur. lsa 114
around 50 passes, lifters have been marked for correct cylinder location.
$700 new, $250.00 plus shipping takes it.

-Auto Meter 5" tach with shift light $75.00 plus shipping

-Painless switch panel $100.00 plus shipping

-Lexan widshield for a fox body $100.00

-4" pin on cowl hood for 86 GT $150.00

-460 fresh d3 std block, cleaned, honed, new cambearings installed, std polished crank, stock rods and pistons checked for size, new main bearings, new timing chain set, the only thing needed is rings and rod bearings. $400 takes all

-15x10 Weld prostars 6.5 backspace with 295/50r15 tires, less than 400 miles, w/lugs and centers, $850 new, $425 takes them.

-5 lug conversion rotors for 87-93 mustang $25.00 ea

-8.8 rearend, disc brakes, 3.73 gears, south side machine lift bars, ready to bolt in. $400.00

-Flaming river manual rack for 79-93 mustang, no shaft $125.00

-Gas tank with rear sump welded in, fits 79-04 stangs $100.00

-QA-1 Coil over springs #14-175 $40.00

-86 GT doghouse, no damage to nose piece but a couple of dings in the fenders. $200.00

-Rust free 86 GT doors $75.00 ea.

This stuff is priced to sell.
You can contact me at 765-541-0577 anytime between 7 am and 11pm, or at morpwr@gmail.com Thanks Troy
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0643.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0650.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0649.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0632.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0627.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0564.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0631.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0618.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0616.jpg
http://i249.photobucket.com/albums/gg237/mustang398/HPIM0595.jpg

[Flaming87lx]

rack is sold

[mustangboy]

Which dizzy were you running in that motor and is it still available?

[A05C]

interested in the windshield and switch pannel

pics please to a05c@aol.com

[Flaming87lx]

Which dizzy were you running in that motor and is it still available?

sold the distributor, it was a msd

[Stangman]

PM sent on the doors

[Flaming87lx]

interested in the windshield and switch pannel

pics please to a05c@aol.com

I have pics of both on here, switch panel has its own pic and the winshield you can see when it was still on the car. let me know if your wanting additional pics. Thanks

[Flaming87lx]

PM sent on the doors
back at'cha

[A05C]

I have pics of both on here, switch panel has its own pic and the winshield you can see when it was still on the car. let me know if your wanting additional pics. Thanks

i think i skimmed over it too quick w/o seeing the pic

whats the thickness of the windshield and what material is it. i know there's a few different kinds is why I'm asking

[Flaming87lx]

I will measure it tomorrow, but it is a thicker style and not the real thin type

[A05C]

Ok that'll work.

[Flaming87lx]

Rearend is sold

[Flaming87lx]

cam, lifters, rocker girdle, powerglide sold

[Flaming87lx]

Heads sold