msd box,2 step and digital window switch...

[black90lx]

i was going to move all this to the hatch of my car to get it out of the way. would it be a good idea to keep it towards the front of the car or does it matter? i was going to run 12g wire for all of it except the power and ground for the msd box, i was going to use 10g for that or would 12g be fine?

[TurboNG]

I know people who have it back there, mine is under the driver's seat :cool2:

[Jeff88coupe]

I have mine in the back seat area (rear seat delete) behind the drivers seat. I would use 10 gauge if you can for the main power feed wire and ground.

Here is a pic of my electronics board...all the relays/msd/2step
http://farm4.static.flickr.com/3116/2305401531_f93c25dd2d.jpg

[black90lx]

I know people who have it back there, mine is under the driver's seat :cool2:

Thats where mine is right now.

[black90lx]

I have mine in the back seat area (rear seat delete) behind the drivers seat. I would use 10 gauge if you can for the main power feed wire and ground.

Here is a pic of my electronics board...all the relays/msd/2step
http://farm4.static.flickr.com/3116/2305401531_f93c25dd2d.jpg

So use 10G on all the wires on the msd 6btm?

[Jeff88coupe]

So use 10G on all the wires on the msd 6btm?

No..just for the power and ground feed to it. I used 12 or 14 for everything else.