PDA

View Full Version : Trying to find some stainless steel tube/pipe


Aweasel
02-16-2009, 07:29 PM
I need only a few inches...probably about 3-4" max of 25mm OD x 20mm ID tubing/pipe and I can't find this crap anywhere. I'd even take 25mm of steel round bar stock but that's not easy to find either. Anyone know of a place I could pick this stuff up in cincy or even online? Everywhere I found has either standard only sizes or is a full commercial supplier. If I found the bar stock I'd just have it drilled out on a lathe to 20mm ID. Just a foot or so would be perfect.
Strkdblwn347
02-16-2009, 08:34 PM
I would call conveyor solutions. they hooked me up with some 5 inch flat stainless. Looked like they had all kind of stainless stuff. dont have number
on me
Jrcmutang
02-16-2009, 11:09 PM
try mandrel-bends.com
Mista Bone
02-16-2009, 11:21 PM
I might have a piece of 1" (25.4mm) bar stock, I used it to align scope rings on rifles.

Finding it will be the hard part, it is in my storage unit.
Aweasel
02-17-2009, 01:40 AM
I got in contact with all of the companies listed so I'm waited on a few responses. I also found metricmetal.com to have what I need but I'm not sure if they just sell in commercial bulk so we'll see. Also, mista bone, thanks but I need more than 1"...I'm making sleeves for the rear axle on my cbr and need at the very least 3-4" so don't mess with going to the trouble digging through your storage unit...I know how that is lol...got one myself.
Mista Bone
02-17-2009, 02:39 AM
1" diameter, but it is about 10" long, or longer. I need to find it anyways since I might be changing a few scopes around on my rifles.
TARDY
02-17-2009, 12:52 PM
Try this


http://www.metalsdepot.com/
Dirtyd0g
02-17-2009, 01:56 PM
try use-enco.com or mcmaster.com
Alan
kaik1969
02-17-2009, 04:05 PM
I have some at my office. 1 1/2 inch ID. Free if you can use that size. I work in Fairfield.
Stang 38L
02-17-2009, 04:44 PM
I have some at my office. 1 1/2 inch ID. Free if you can use that size. I work in Fairfield.

My wife works at Rodem, Inc. Its a process equipment company. They deal with dairy's, food processing companies, etc. Many guys come in to buy SS pipe. Call em up and ask. Tell them Jill Bryant's husband sent you.

www.rodem.com