PDA

View Full Version : throttle body?



2000GT
02-24-2009, 12:44 PM
do 94 to 04 have the same throttle body?

mustangbangher
02-24-2009, 12:51 PM
Don't know but if your looking for one I have one for sale off a 2000 gt

306Power
02-24-2009, 12:53 PM
The 94-95 are 5.0s so those arent the same, the 96-98 would be the same size and I believe but I could be wrong the 99-04s are a little bigger than the 96-98 GT's.

2000GT
02-24-2009, 01:00 PM
yeah i was looking to try and find a cheap aftermarket one 70mm and intake

306Power
02-24-2009, 01:14 PM
You might want to look at getting a tuner for it also. It might run rough without a tune because your air/fuel ratio will be off and the car will actually run slower if the air/fuel ratio is off.

Bluecrew07
02-24-2009, 01:23 PM
If your looking for one i have a 70mm off my 2002 gt for sale

facemelter71
02-24-2009, 01:36 PM
You might want to look at getting a tuner for it also. It might run rough without a tune because your air/fuel ratio will be off and the car will actually run slower if the air/fuel ratio is off.

Your A/F ratio wont be off from a TB swap.Some thing that small the ECM will adjust to.You didnt describe what the car allready has.If its all stock and your swapping a TB then it would be pointless.Start with a Cold air intake and go from there.
96-04 2v GT's have the same throttle body

2000GT
02-24-2009, 01:44 PM
Your A/F ratio wont be off from a TB swap.Some thing that small the ECM will adjust to.You didnt describe what the car allready has.If its all stock and your swapping a TB then it would be pointless.Start with a Cold air intake and go from there.

yea its stock i was just wondering if they were the same. but yea i was going to start with a cold air intake.

1992MustangDW
02-24-2009, 01:56 PM
face melter is right 96-04 2v are the same.

facemelter71
02-24-2009, 02:31 PM
yea its stock i was just wondering if they were the same. but yea i was going to start with a cold air intake.

I would get all of your current bolt on's together and on the car before id get the tune done.

2000GT
02-24-2009, 02:34 PM
ok thanks every one

e5shea
02-24-2009, 10:31 PM
go with accufab

2-8-1
02-25-2009, 02:49 PM
yeah i was looking to try and find a cheap aftermarket one 70mm and intake

Go to a junkyard and get a throttle body off a Lincoln Aviator. It's close to 70mm and works PERFECTLY with the 4.6 Mustang engine.

Blkcobra01
02-26-2009, 08:52 AM
Avaitor is a 4V DOHC 4.6L that will not work for him.