Brake light issues

[Pitbull1052]

Anyone know of a inexpensive shop that can track down a brake light wiring issue? My brake lights and turn signals stopped working, I've checked all the bulbs, all the fuses, and replaced the brake switch. I tested the connection at the switch and as far as I can tell it's not getting any juice..... It's my only means of transportation.........



TY

Brad

[Black Horse]

What part of town do you live in?

[Pitbull1052]

Twards Amelia.... Right off 125

[Pitbull1052]

I don't think I mentioned I do have running lights.....

[bobtsgt]

Did you check all your fuses yet?

[Pitbull1052]

Yes sir..... I pulled everyone (hate resetting radio stations!)

[Pitbull1052]

it's just weird, I mean no brake lights, no turn signals, and no hazards.... but it has tail lights.....

[347sc]

Multi function switch maybe. Power for those are ran thru it. Its your turn signal switch

[Pitbull1052]

kewl..... anyone know if these can be purchased new?

[bobtsgt]

at least take your covers off and jiggle the harness around and see if that helps. The harness or pins may be loose or pulled out slightly.

[fordfan]

Let me look through some prints and see if I can find one common area for the brake lights and turn signals.

[Pitbull1052]

Bob, so take the covers off of the colum or ???? and thanks FF

[347sc]

Yes the colum covers. Look for burnt connections,loose wires,wires pushed out of connectors. Check continuity of the switch etc.

[Pitbull1052]

sweet will do.... i'll let you all know what comes of it... Thanks for the assist

[pmneed1]

def the multi switch (turnsignal switch)

[black90lx]

My buddy is having the same problem. He has tail lights but no break lights, turn signals or hazard's. Everytime he hits the break pedal it pop's the fuse. I checked all the wires and i can't find a bad spot where it might be grounding out.

[Pitbull1052]

mines not even popping a fuse or anything, i'm going to work in it tomorrow with FF and I'll post what the fix was.