PDA

View Full Version : Welding a Throttle Body


chris91
04-13-2009, 10:19 PM
I just picked up a BBK throttle body and it has a hole from a Nitrous Nozzle in the body of it. The previous owner had a small bolt and nut JB welded onto it but the head of the bolt was inside of the throttle body and I thought that would disrupt the airflow so I took it all off. I just need this hole welded up and ground smooth. Also where the throttle cable connects needs a small spot welded. Anyone on the East side able to do this?
NA/NOTCH
04-14-2009, 06:10 PM
pm me a number ill take it to work,im right down the street from you
Rick93coupe
04-14-2009, 07:22 PM
You could also tap it and use a shallow pipe plug. Cheap and easy.
chris91
04-14-2009, 07:24 PM
Its already tapped for the Nitrous Nozzle. The spot is really thin though and I dont want anything sticking out in the way or falling in.

http://i32.photobucket.com/albums/d31/blown94ls/DSCN2861.jpg
Rick93coupe
04-14-2009, 07:35 PM
pm me a number ill take it to work,im right down the street from you


Sounds like this guy is the man with a plan! :bigthumb