Triz
04-14-2009, 04:33 PM
Done racing, just want to enjoy driving a mustang instead of working on one. need to get these parts out of the garage. Posted in misc. didn't want to break down the parts list.
-Canfield 192cc heads were on the car for a summer pulled them off, cleaned up and have been sitting on shelf since. 58cc, 3/8" stud mount, 2.02 intake 1.6 exhaust, springs good to .600 part#20-450-58-0 $950
-WEIAND stealth 351W intake part#8023-$100
-Mac Racer's choice white face gauges part#2615 for 96-98 2-v 150 mph speedo-NIB-$20
-2 sets of fox GT tail lights-no cracks/need paint-$50 each pair
-Stock hood-no dents-$20
-fox Hatch Quarter glass L&R-moldings not perfect/glass good-$100
-fox GT wing-no brake lense-$20
-fox GT side rockers F&R pieces L&R-no cracks/tears needs paint-set-$50
-BBK subframe connectors fox-NIB-$60
-Weiand Stealth 351W intake manifold-$100
-Edelbrock victor jr. intake drilled and tapped for coolant cross-over at rear-$175
-NX EFI N2O spray dual plate kit for Trick flow intake used - plate just refurbished by NX still in package. NX solenoids and purge extra set of small CF solenoids to hook up second stage. CF 10 lb. bottle, brackets with bottle heater and blow down tube.-$450
-NX Hitman kit (square bore) with 2 10lb bottles, blow down tube, bottle brackets, purge, bottle heater, rpm window switch.-$650
Also will have a 1990 LX roller to list, and other items as well.
Open to reasonable offers on all items, want to try to sell before listing it on ebay.
Located in Berlin Heights, OH.
-Canfield 192cc heads were on the car for a summer pulled them off, cleaned up and have been sitting on shelf since. 58cc, 3/8" stud mount, 2.02 intake 1.6 exhaust, springs good to .600 part#20-450-58-0 $950
-WEIAND stealth 351W intake part#8023-$100
-Mac Racer's choice white face gauges part#2615 for 96-98 2-v 150 mph speedo-NIB-$20
-2 sets of fox GT tail lights-no cracks/need paint-$50 each pair
-Stock hood-no dents-$20
-fox Hatch Quarter glass L&R-moldings not perfect/glass good-$100
-fox GT wing-no brake lense-$20
-fox GT side rockers F&R pieces L&R-no cracks/tears needs paint-set-$50
-BBK subframe connectors fox-NIB-$60
-Weiand Stealth 351W intake manifold-$100
-Edelbrock victor jr. intake drilled and tapped for coolant cross-over at rear-$175
-NX EFI N2O spray dual plate kit for Trick flow intake used - plate just refurbished by NX still in package. NX solenoids and purge extra set of small CF solenoids to hook up second stage. CF 10 lb. bottle, brackets with bottle heater and blow down tube.-$450
-NX Hitman kit (square bore) with 2 10lb bottles, blow down tube, bottle brackets, purge, bottle heater, rpm window switch.-$650
Also will have a 1990 LX roller to list, and other items as well.
Open to reasonable offers on all items, want to try to sell before listing it on ebay.
Located in Berlin Heights, OH.