Garage sale 5.0 4.6

[Tommy D]

Cleaning out garage:

01 Cobra block 39,XXX miles when removed 200.00
04 Cobra heads bare, need to cleaned and machined 275.00
01 Cobra lower intake, bottom was removed to port but never completed 100.00
New design DOHC tensioners, arms, pins. Stronger than pre 03 25.00
New polished Cobra chains 30.00
New Accufab billet timing wheel 75.00
New Diamond FS/PS pistons .040 over all the tricks done, includes pins & Total Seal rings 300.00 (Quoted over 1000 when I called in the job number)
Earls fittings lots of sizes email what you need
Earl's Ultralite Hose 20ft # 10 3 ft #12
NEW AFCO fox body aluminum radiator 250.00 (Summit over 400 last I checked)
NEW CPR 5.0 fuel rails 60.00
Royal Purple Racing 9 oil 4 cases and 1 with 1 bottle missing
Royal Purple Max Gear 75/90 2 cases left
lots of gray 92 5.0 parts, center console, visors, HVAC controls CALL
92 160 MPH cluster shows 40,XXX miles good upgrade for 85 MPH cars
New Stewart/Yates standard rotation water pump for use with March alternator kit, cleans up your FEAD 45.00
March billet alternator bracket kit
Lots of nitrous parts and fittings for dry kit

Make an offer on any thing with price not listed it ALL has to go.

Yes I'll ship but buyer pays shipping, I don't charge extra to box or any of that.

Email for any questions, pics.

[bobtsgt]

What's all wrong with the block and where is it located?

[Black92LX]

what are you wanting out of the cluster and visors for the 92???

[PonymanfiveO]

Hey Tommy,

Are the tensioners new or used?
Are they the metal ones or the plastic ones?

The pistons for a 4.6 or 5.0?
gas porterd?
email me the specs on them.

madmattjohnson at gmail dot com

[Tommy D]

Bob, Nothing, Fairfield, near Cincy Mills

Black92, Cluster $35? Visors $15?

Matt New Tensioner arms aluminum, Slugs 4.6, no gas porting allowed in FS. I can give you the build number I don't have the spec sheet anymore but Diamond can tell you specifics.

[Tommy D]

I was out in the garage tonight and found more stuff:

3G alternator, give someone a deal if they buy the water pump and March Alt bracket
Black Lincoln DOHC valve covers with old school SVO oil cap :D
NEW GT40 coil covers 50.00
Cobra COP's 50.00
4.6 used starter 20.00
Grey center console with tray no arm rest though 25.00
FL-820 oil filter and PCV valve 8.00
01 GT steering wheel 20.00
Mach 460 tweeter pods, rear package tray and sub enclosure 25.00
Taylor battery relocation kit 10.00, the studs and brace are missing but you can make your own at Lowe's for less than $5
MSD RPM controller (for nitrous or tachs) 15.00
Bunch of parts from my 92, interior, A/c stuff.

I should just spread all this $hit out and have a real garage sale. LOL

[Rick93coupe]

What color is the earls hose? Is it new/used?

[rpppaprp]

Can you send pics of the nitrous controller?

[bobtsgt]

pm me your number.may be able to come get it tonight if not tomorrow.

[Black92LX]

what color is the steering wheel from the 01 and what shape is it in? also do the visors from the 92 have mirrors?

[Tommy D]

Rick, it's the black Ultra Lite, same as what Craig uses. It's new

rp, do you mean the MSD switch?

Bob you have PM

Black92, very good condition, graphite, yes they have mirrors.

[Maximus]

Got a clutch fork for a 96-up?

[Black92LX]

you have a PM

[Tommy D]

Royal Purple SOLD

Craig, no clutch fork.

PM's replied.

96-98 stock Cobra Cams 100.00 Have ARP bolts for them too.

[Tommy D]

01 Cobra Block SOLD
Accufab Trigger Wheel SOLD
AFCO Radiator Pending

[93snake]

Thanks Tommy

[Dalton]

do u have a complete NOS kit if so send me e-mail at dalton2577@fuise.con antell details i will very interesded

[black90lx]

Whats the rpm adjustment's on controller? Do you have a part number so i can see exactly what it is?

[Tommy D]

When I get home I'll take pics of all the little things like fittings and the controller and post them up.

[satan jamez]

Taylor battery relocation kit :) What's the part #?

[Tommy D]

I think it's 48000

[cstreu1026]

What kind of block were you planning to use the pistons in? I've never seen .040" over pistons for a mod motor. Or are they for a 5.0?

[kennebellcobra]

Does the mach 460 have the amps with it?

[Brandon Alsept]

The pistons are actually .045 over which will make a modular 289 cubes which is the nmra limit. They are awesome peices

[Tommy D]

:bigthumb What brandon said

Kennebellcobra, yes they have the amps.

04 Cobra Heads SOLD
Earl's Pro Lite Hose SOLD
Water Pump, March Alt bracket, 3G Alt, SOLD

[kennebellcobra]

:bigthumb What brandon said

Kennebellcobra, yes they have the amps.

04 Cobra Heads SOLD
Earl's Pro Lite Hose SOLD
Water Pump, March Alt bracket, 3G Alt, SOLD

Forgot about this...where you located?

[Tommy D]

Fairfield, near Mercy Hospital

[Tommy D]

Cleaning out garage:

01 Cobra block 39,XXX miles when removed SOLD
04 Cobra heads bare, need to cleaned and machined SOLD
01 Cobra lower intake, bottom was removed to port but never completed 100.00
New design DOHC tensioners, arms, pins. Stronger than pre 03 25.00
New polished Cobra chains 30.00
New Accufab billet timing wheel SOLD
New Diamond FS/PS pistons .040 over all the tricks done, includes pins & Total Seal rings NEW PRICE 250.00 (Quoted over 1000 when I called in the job number)
Earls fittings lots of sizes email what you need
Earl's Ultralite Hose 20ft # 10 3 ft #12 SOLD
NEW AFCO fox body aluminum radiator 250.00 (Summit over 400 last I checked)
NEW CPR 5.0 fuel rails 60.00
Royal Purple Racing 9 SOLD
Royal Purple Max Gear 75/90 SOLD
lots of gray 92 5.0 parts, center console, visors, HVAC controls CALL
92 160 MPH cluster shows 40,XXX miles good upgrade for 85 MPH cars
New Stewart/Yates standard rotation water pump for use with March alternator kit, cleans up your FEAD SOLD
March billet alternator bracket kit SOLD
Lots of nitrous parts and fittings for dry kit



UPDATED

[black90lx]

did you ever get the part number or pics of the msd rpm controller?

[Tommy D]

MSD # 8950 with 8671

[black90lx]

ok never mind the rpm's are to high. i was going to use it for my 2 step.

[Tommy D]

If anyone knows 1slowls, he's been trying to get ahold of me about some Pony wheels but his account was messed up or something, now I can't PM him. My number is 478-5224.

Pistons Pending
Radiator SOLD

[mustang3091]

I will take the 92 cluster if you want $35 for it