Timido
04-26-2009, 05:02 PM
Hydraulic Flat Tappet
Comp 31-414-3 COMP Cams Magnum Hydraulic Camshafts
, Hydraulic Flat Tappet, Advertised Duration 270/270, Lift .500/.500, Ford, Small Block, Each NEW in BOX
Comp 7835-16 COMP Cams High Energy Pushrods
Pushrods, High Energy, Steel, 5/ 16 in. Diameter, 8.152 in. Length, Universal, Set of 16
NEW IN BOX
Edelbrock Performer-Link True Roller Timing Chain Sets
Timing Chain and Gear Set, Performer-Link, Double Roller, Iron/ Steel Sprockets, Ford, Small Block, Set
NEW IN BOX
New set of Hyraulic flat lifters soaking in oil.
This would be a great set up a 351 set up without changing over to roller cams and expensive lifters.
New 6750 Master fuel pump.
$100 For the Cam Lifters Pushrods Timing set all new never used
I also have a 79 351 block that has been machined .030 over and align bored and has new cam bearings for $150 It would need to be cleaned up with a hone it has been sitting.
If you are going for a real cheap 351 Build I have a set of stock 351 heads.
Comp 31-414-3 COMP Cams Magnum Hydraulic Camshafts
, Hydraulic Flat Tappet, Advertised Duration 270/270, Lift .500/.500, Ford, Small Block, Each NEW in BOX
Comp 7835-16 COMP Cams High Energy Pushrods
Pushrods, High Energy, Steel, 5/ 16 in. Diameter, 8.152 in. Length, Universal, Set of 16
NEW IN BOX
Edelbrock Performer-Link True Roller Timing Chain Sets
Timing Chain and Gear Set, Performer-Link, Double Roller, Iron/ Steel Sprockets, Ford, Small Block, Set
NEW IN BOX
New set of Hyraulic flat lifters soaking in oil.
This would be a great set up a 351 set up without changing over to roller cams and expensive lifters.
New 6750 Master fuel pump.
$100 For the Cam Lifters Pushrods Timing set all new never used
I also have a 79 351 block that has been machined .030 over and align bored and has new cam bearings for $150 It would need to be cleaned up with a hone it has been sitting.
If you are going for a real cheap 351 Build I have a set of stock 351 heads.