bobtsgt
05-04-2009, 08:30 AM
I have a slightly used BC Automotive built 4r70w for sale. Going with a C4 now for my needs of a more track oriented car. Tranny shifts great on the road and only made 2 passes on the track with only 390tq or so. Everything listed is what comes with it. Tranny was gone through completely by Darrin @ BC before I installed it in my car. He put in the latest upgraded clutches and packed them tight. This tranny is suppose to be good for 600-700lbs/tq I believe. Perfect for those who drive the highways and the strip. Computer controlled so you will need a auto computer or some sort of a controller like a Baumann. You could swap out the valve body for a manual one if you wanted. Keeping tranny cooler/fan, cross member (was same as my T45 one) and may keep VSS sensor if I need it for my C4 swap. Don’t want to separate anything right now. Looking to get $2000obo for it all. Located outside Cincinnati,OH. May be able to ship out of my work if need be. I do take paypal if you add the 3% for it.
BC-Automotive built (2003 Mach1) 4R70W Performance transmission with a modified auto Mach 1 valve body kit and mechanical diode upgrade, new position sensor, new performance clutches repacked to Darrin’s specs, newer filter, new tail shaft seal,
tail shaft lubrication mod.
96 4R70W wiring harness, may have a 99+ wiring harness if I can find it
Stock auto driveshaft with new U joints
Stock 6 bolt flex plate
Cooler lines out of tranny (use hose to connect to cooler)
Dip stick tube w/stick
PI Triple Disk 3,400 rpm stall converter (billet)
MAC deep well transmission pan w/ holes tapped for tranny gauge and fan thermo (will be plugged off, keeping sensors)
Stock 4R70W shifter w/cable
UPR black billet shift ball
UPR overdrive relocation kit.
Except for tranny all of this has around 5000 miles if that on it
http://i219.photobucket.com/albums/cc112/bobtsgt/for%20sale/100_0700.jpg
http://i219.photobucket.com/albums/cc112/bobtsgt/for%20sale/100_0701.jpg
http://i219.photobucket.com/albums/cc112/bobtsgt/for%20sale/100_0702.jpg
BC-Automotive built (2003 Mach1) 4R70W Performance transmission with a modified auto Mach 1 valve body kit and mechanical diode upgrade, new position sensor, new performance clutches repacked to Darrin’s specs, newer filter, new tail shaft seal,
tail shaft lubrication mod.
96 4R70W wiring harness, may have a 99+ wiring harness if I can find it
Stock auto driveshaft with new U joints
Stock 6 bolt flex plate
Cooler lines out of tranny (use hose to connect to cooler)
Dip stick tube w/stick
PI Triple Disk 3,400 rpm stall converter (billet)
MAC deep well transmission pan w/ holes tapped for tranny gauge and fan thermo (will be plugged off, keeping sensors)
Stock 4R70W shifter w/cable
UPR black billet shift ball
UPR overdrive relocation kit.
Except for tranny all of this has around 5000 miles if that on it
http://i219.photobucket.com/albums/cc112/bobtsgt/for%20sale/100_0700.jpg
http://i219.photobucket.com/albums/cc112/bobtsgt/for%20sale/100_0701.jpg
http://i219.photobucket.com/albums/cc112/bobtsgt/for%20sale/100_0702.jpg