Spring Cleaning

[FINT07]

94-98 lift off cowl hood (with open lourvers prolly like a 2 1/2inch cowl) $150
FMS 30lb injectors $120
New ARP 351 1/2in head bolts SOLD
New ARP 302/351 rod bolts $35
351w Edelbrock carb intake (will need threads fixed on top) $75
New MSD Street Fire TFI Coil $35
Edelbrock 600cfm Carb (put new floats and gaskets in it and wouldn't run right) $40
SN95 Ponys w/ tires no center caps tires are in decent shape $125
Summit Header Bolts $15
Fox Trans Crossmember $40
302 truck lower $35
factory fox sunroof $40
Summit battery box and cable kit SOLD
New Summit battery cut off $15
1in Edelbrock carb spacer $20
NOS plate for stock efi intake (between upper and lower) $60
94-95 A/C delete $25
87-93 A/C delete $25
87-93 driveshaft $20
Fox Black outs $10
SN95 v-6 guage cluster $25
LX tail lights (small crack on pass side) $75
Stock 94-95 upper and lower intake w/ t.b. $50
lunati cam and solid flat tappet lifters(its either .465 or .478 lift will check later) $75
7/16 set of stud mount roller rockers lock nuts $25
red moroso aluminium valve covers $40

will prolly round up more stuff so if you need some you dont see just ask and i might have it laying around
i am open to trades

i'm looking for the following
31 spline spool for 8.8
upper and lower control arms
8.8 rear end girdle
strange 9inch ends
tubular k member and arms
front coil over
caster camber plates
aluminium fuel cell
front struts (like lakewood 90/10 or comp eng, etc
rear shocks(after market)


if you want pics just ask
thanks matt

[PonymanfiveO]

Id like to see the fox sunroof.

I have upper and lowers for sale too!

[01BADGT]

If it is the double hump fox crossmember ill take it. We are you located?

[FINT07]

whats your email and i'll get you some pics also what are the control arms you have for sale

thanks matt



Id like to see the fox sunroof.

I have upper and lowers for sale too!

[stang5slow]

how old is the a/c delete? for SN

[chadomac]

pm sent

[Rick93coupe]

Send me a pic of the carb and battery cut off, I may want both of them.
email address is in my signature.

[FINT07]

01BADGT-- yes it is a fox crossmember i'm in lawrenceburg ky

Stang5Slow---- not for sure how old it is but it's alittle dirty but in good shape

Rick93coupe--- i'll get you some pics tommorrow

thanks matt

[FINT07]

ttt need this stuff out of my way

[frey_gt]

Can you send me some pics of the 94-98 cowl hood. Thanks.

[FINT07]

just sold the hood
thanks matt

[facemelter71]

Are you ever up this way,Colerain,west Chester area?I might take the carb.

[Rich]

How many miles are on the injectors?

[FINT07]

it wont let me edit the post so here is the updated list

94-98 lift off cowl hood (with open lourvers prolly like a 2 1/2inch cowl) SOLD
FMS 30lb injectors SOLD
New ARP 351 1/2in head bolts SOLD
New ARP 302/351 rod bolts $35
351w Edelbrock carb intake (will need threads fixed on top) $75
New MSD Street Fire TFI Coil $35
Edelbrock 600cfm Carb (put new floats and gaskets in it and wouldn't run right) SOLD
SN95 Ponys w/ tires no center caps tires are in decent shape $125
Summit Header Bolts $15
Fox Trans Crossmember $40
302 truck lower $35
factory fox sunroof $40
Summit battery box and cable kit SOLD
New Summit battery cut off $15
1in Edelbrock carb spacer $20
NOS plate for stock efi intake (between upper and lower) $60
94-95 A/C delete $25
87-93 A/C delete SOLD
87-93 driveshaft $20
Fox Black outs SOLD
SN95 v-6 guage cluster $25
LX tail lights (small crack on pass side) $75
Stock 94-95 upper and lower intake w/ t.b. $50
lunati cam and solid flat tappet lifters(its either .465 or .478 lift will check later) $75
7/16 set of stud mount roller rockers lock nuts $25
red moroso aluminium valve covers $40


thanks matt