Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
What pushrods to run? [Archive] - StangBangerz Forums
PDA

View Full Version : What pushrods to run?


mailman
05-18-2009, 04:15 PM
5.0 with a X303 cam, OEM lifters, 1.6 roller rockers, AFR 165 heads, 120# seat pressure.

Proform has 1-piece 4130 pushrods for $91.99, Lunati has pushrods of the same description for $169.99.
What would you suggest? What else is out there, readily available, and reasonable?
Thanks!
facemelter71
05-18-2009, 04:56 PM
I run comp cams pushrods in the 331.Good price also.
mailman
05-18-2009, 05:10 PM
I run comp cams pushrods in the 331.Good price also.

The Comp Cams Magnums, p/n 7621-16?
Rick93coupe
05-18-2009, 05:13 PM
I would go with the trickflow pieces on Summit's website. I've run them in the past with no problems. They're around 90.00 also.
chad393na
05-18-2009, 06:42 PM
I would go with the trickflow pieces on Summit's website. I've run them in the past with no problems. They're around 90.00 also.

Definately can't go wrong with these.
mailman
05-21-2009, 03:19 PM
Trickflow it is. Thanks guys.
coupegt
05-23-2009, 12:01 AM
I have a set of crane 6.350 if they will work for you $50.
4barrel
05-23-2009, 11:22 PM
Just wondering, did you measure to see how long you needed them to be?
coupegt
05-26-2009, 10:46 AM
I have a z-303 cam with gt40p heads with pedestal mount rockers and had to use 6.300 pushrods. I got new ones for around $100.
4barrel
05-26-2009, 03:17 PM
Mailman, if you haven't already, you should probably measure to see what length pushrod to use.
mailman
05-27-2009, 05:17 PM
Mailman, if you haven't already, you should probably measure to see what length pushrod to use.

Done, but thanks for the reminder. Good feedback and pointers are never wasted!