Flexplate questions

[RyanR]

Alright I need to clear a few things up before I proceed with my project. I need to know what oz flexplate to use with stock motor. Its a 302. I think its 50 but im just making sure. Also How many teeth do I need on the flexplate. I have a JW ultra bell if that has anything to do with it. Last but not least the converter bolt pattern. Its a redneck 9.5. How do you measure it? Thanks

Ryan

[Walter]

50oz is what you need. Make sure you have the right bell for your trans (case or pan filled) The bell bolts to the pump on a case filled c4. Also the fill type will determine the flexplate you need.

http://www.tciauto.com/Products/TechInfo/c4_bellhousings.asp

[mustangboy]

If you need a 157t 50oz flex plate I have a brand new TCI for sale

[RyanR]

Thanks for the help Walter.

Mustangboy pm'ed

[mustang8998]

50oz is what you need. Make sure you have the right bell for your trans (case or pan filled) The bell bolts to the pump on a case filled c4. Also the fill type will determine the flexplate you need.

http://www.tciauto.com/Products/TechInfo/c4_bellhousings.asp

Not always. I have a case fill, with a big bell. I think it was a truck transmission....maybe?

[Dirtyd0g]

For a c4 use an aod flexplate to be safe. DO NOT USE A C6 or E4OD flexplate.
Alan