What cam??

[exrider416]

My motor has a lot of oil blowby on the number 7 cylinder. I'm just buying a reman. stock short block that will be bored .040 over. My combo will be that short block w/ edelbrock performer 5.0 heads that have 1.7rr, trick flow street heat upper and lower, 75mm throttle body w/ 24 lb injectors and matching mass air. My motor now has an e303, but i want to go with something different cause i am getting the well known idle problem from the e303. Let me know what cam you guys think i should go with.

Thanks,
Dave

[306Power]

From what Ive seen on 5.0s I really like the Trickflow Stage 2 cam with some springs. If not wanting to buy springs or worry about clearance issues, I also like the Stage 1 Trickflow cam.

[1992MustangDW]

brothers car had a stage 2 trickflow, sounded great and had alot of power.

[mustang112]

ive got an x-303 cam and im running trw flat top pistons with reliefs and comp cam springs and i have no clearance issues. should be starting it up for the first time shorty if all goes well =)

[exrider416]

well my plans switched im going with a 347 stroker shorts block. Think im just gonna get an Ed Curtis custom grind cam for it

[mustang112]

nice, let me know how it comes out.... my next build is going to be either a 331 turbo or 347 turbo.... more likely 331