ISKY .565 LIFT CAM AND LIFTERS FOR BBF $100.00

[Flaming87lx]

Less than 300 miles, its broke in perfect, lifters are all indexed for each lobe.

Heres info on cam-
Ford 429 460 Isky hydraulic cam kit Iskenderian 280H. Grind No./Type 280-MEGA HYDRAULIC High performance use/bracket racing. Lopey idle. 2500 Stall. 9.5-10.5 1 compr. 3.90-4.11 axle ratio. 780+ CFM Carb. RPM-Range 2500-6800 Valve Lift - INT .565 EXT .565 Valve Lash Hot

I paid 250 from Maddog performance. I'll take $100.00
765-541-0577 Thanks Troy

[Stangman]

Less than 300 miles, its broke in perfect, lifters are all indexed for each lobe.

Heres info on cam-
Ford 429 460 Isky hydraulic cam kit Iskenderian 280H. Grind No./Type 280-MEGA HYDRAULIC High performance use/bracket racing. Lopey idle. 2500 Stall. 9.5-10.5 1 compr. 3.90-4.11 axle ratio. 780+ CFM Carb. RPM-Range 2500-6800 Valve Lift - INT .565 EXT .565 Valve Lash Hot

I paid 250 from Maddog performance. I'll take $100.00
765-541-0577 Thanks Troy

Would this work for my 460?

It's a stock block with dished pistons, D0VE heads and an edelbrock performer intake... would this be too much cam?

I'm interested in it...

[Flaming87lx]

Would this work for my 460?

It's a stock block with dished pistons, D0VE heads and an edelbrock performer intake... would this be too much cam?

I'm interested in it...
Yes, I took it out of my 514. Let me know Jesse, Thanks Troy

[Flaming87lx]

No it's not too big, great street/strip cam. good street manners, sounds awesome

[Stangman]

I know you said its a hydraulic, but is it a flat tappet as well?

I'd love to grab it, but not sure when I'd be able to come out there...

[Flaming87lx]

Yes, flat tappet, I'm picking up parts Saturday in columbus, I can meet you in cincy somewhere if you want. Thanks

[Flaming87lx]

sold thanks Jesse