View Full Version : valve covers
Steves LX
09-17-2009, 01:47 PM
I have a set of BBK aluminum valve covers. They have no baffle where the stock covers normally is. So in return at high RPM's the rockers sling oil up the fill tube and into the hose that is vented with my air intake and TB. Anyone ever make a baffle to fix this problem? I dont beleive there's any valve covers out there other than the stock ones that have a baffle on them. I can't use the stock ones because of my rockers.
facemelter71
09-17-2009, 02:20 PM
Ive got my line plugged that goes from the valve cover to the T/B,and I have a small filter on the valve cover port next to the fill cap.
And Im sure if you had to you could make some thing with some sheet metal,viton washers,and some small bolts.Just space the metal from the valve cover to allow oil in with some washers,and use the viton washers to keep oil from getting out.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.