Jeff88coupe
09-20-2009, 03:51 PM
I'm selling my old head/rocker/pushrod/lifter setup off my 347. I upgraded to a new set of RHS 215's. I had to pull off my 185's to get one of them fixed due to me cracking a rocker arm bolt boss in the head while trying to swap valve springs with the heads on the motor in the car. That head is now at BES getting fixed..will be good as new when done. These heads flow ~295int/220ext at .600". My car put down 420rwhp/400rwtq n/a and ran a best of 10.84 at 124 n/a @3250# on pump 93 gas, 9.92 at 136 on a 175 shot @ 3050# running these heads.
Here is the list of parts I'm selling
Set of used pedastal mount AFR 185's (#1492) that are hand ported by Neil Erickson at Midwestern Induction Technology (http://www.mustangcentral.net/neil/index.html). These heads flow ~295int/220ext at .600". They have about a 58cc chamber...they come from AFR as 60cc..but they were decked to make sure they were straight once when I had them freshened. They have Comp 939 dual valve springs (~130#on the seat/#400 open pressure) and Comp 732 Titanium retainers with 10* locks.
$1550 for the pair.
http://farm3.static.flickr.com/2543/3938215712_3fd8f15a9e.jpg
http://farm3.static.flickr.com/2639/3938220238_515f9201a2.jpg
Intake port
http://farm4.static.flickr.com/3526/3937443949_6534d2a313.jpg
http://farm3.static.flickr.com/2639/3938220238_515f9201a2.jpg
Exhaust port
http://farm3.static.flickr.com/2664/3937434297_3c8cc56879.jpg
Chambers
http://farm3.static.flickr.com/2633/3938226430_b7b4e8912e.jpg
http://farm4.static.flickr.com/3447/3938227994_4604e9441f.jpg
Set of used Harland Sharp 1.6 adjustable shaft pedastal mount rockers.
Here is a article about them.
http://www.stangtv.com/forum/testing-harland-sharp-pedestal-mount-adjustable-4552.html#
$350...are $550 new @ summit
http://farm3.static.flickr.com/2674/3937456315_07cb71f266.jpg
Set of used Manley chromoly 6.90" pushrods
$80
http://farm3.static.flickr.com/2499/3938229586_bfa1bbd3f3.jpg
Set of used Come 838-16 solid roller lifters. Have ~3 seasons of use..very little street miles. All roller still roll smooth.
$200
http://farm3.static.flickr.com/2650/3938210970_f02cda414e.jpg
Will sell the whole setup (heads,rockers,pushrods,lifters) for $2100
Heads and Rockers for $1850
I will not seperate unless the heads sell first.
All prices + shipping and 3% paypal fees if needed.
Here is the list of parts I'm selling
Set of used pedastal mount AFR 185's (#1492) that are hand ported by Neil Erickson at Midwestern Induction Technology (http://www.mustangcentral.net/neil/index.html). These heads flow ~295int/220ext at .600". They have about a 58cc chamber...they come from AFR as 60cc..but they were decked to make sure they were straight once when I had them freshened. They have Comp 939 dual valve springs (~130#on the seat/#400 open pressure) and Comp 732 Titanium retainers with 10* locks.
$1550 for the pair.
http://farm3.static.flickr.com/2543/3938215712_3fd8f15a9e.jpg
http://farm3.static.flickr.com/2639/3938220238_515f9201a2.jpg
Intake port
http://farm4.static.flickr.com/3526/3937443949_6534d2a313.jpg
http://farm3.static.flickr.com/2639/3938220238_515f9201a2.jpg
Exhaust port
http://farm3.static.flickr.com/2664/3937434297_3c8cc56879.jpg
Chambers
http://farm3.static.flickr.com/2633/3938226430_b7b4e8912e.jpg
http://farm4.static.flickr.com/3447/3938227994_4604e9441f.jpg
Set of used Harland Sharp 1.6 adjustable shaft pedastal mount rockers.
Here is a article about them.
http://www.stangtv.com/forum/testing-harland-sharp-pedestal-mount-adjustable-4552.html#
$350...are $550 new @ summit
http://farm3.static.flickr.com/2674/3937456315_07cb71f266.jpg
Set of used Manley chromoly 6.90" pushrods
$80
http://farm3.static.flickr.com/2499/3938229586_bfa1bbd3f3.jpg
Set of used Come 838-16 solid roller lifters. Have ~3 seasons of use..very little street miles. All roller still roll smooth.
$200
http://farm3.static.flickr.com/2650/3938210970_f02cda414e.jpg
Will sell the whole setup (heads,rockers,pushrods,lifters) for $2100
Heads and Rockers for $1850
I will not seperate unless the heads sell first.
All prices + shipping and 3% paypal fees if needed.