Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
351 strokers [Archive] - StangBangerz Forums
PDA

View Full Version : 351 strokers


pegasus
10-13-2009, 01:44 PM
hey guys im putting togather a 351W stroker but im not sure whats the best way to go, the engin i have now is .20 over and will need to be turned again anyway due to some rust in the walls
Jeff88coupe
10-13-2009, 03:57 PM
Will it clean up at .030" over? If so..that's the bore most off the shelf stroker kit's are based on. Now..to just decide how big you want to go? a 408 is about the biggest I'd go in a stock block.
Rick93coupe
10-13-2009, 08:00 PM
I've been researching a new motor for my boat and talked to a few guys who build them for their customers. They recommend no more than 418 with a stock block. Takes a pretty stout head to feed a motor that big, so don't skimp out there if you do it.
331TwistedWedge
10-13-2009, 08:15 PM
i'd say a gt40, gt40p or an e7te should work well enough for your 408 :lol:

wonder how that would do? ... 11.99? ... that would be some funny shit to see ...
Rick93coupe
10-13-2009, 08:17 PM
Peak power just off idle? =)
331TwistedWedge
10-13-2009, 08:18 PM
Peak power just off idle? =)

man i know some of the middletown guys have tried something like that ... i want to hear some dyno numbers or times at the track :lol:
pegasus
10-13-2009, 09:01 PM
what about using 1972or73 two barrel C heads and making a clevor or do i have it the other way around??