Who has pro comp heads? Need Help

[1992MustangDW]

I have 210cc 2.02 valve pro comp heads, stock short block. I plan on running an x cam if it will fit. If anyone is running these will you pm me and let me know what kind of cam you are running, pushrods, and rockers.


I will be running a victor jr intake, and 750 holly.

[facemelter71]

As far as I know,you cant run a 2.02 intake on stock pistons.Only one's you can run are the twisted wedge heads.

[03z06vette]

I was wondering how well they work compaired to victor jr with 205

[1992MustangDW]

I was told they would work on them????

[Walter]

Just throw it together, then check the piston to valve clearance.

[bangingears]

I was told they would work on them????


don't think so, they are pretty much a chinese victor jr head, with the same valve angles, slight smaller valve. People were having a bunch of trouble with rocker geometry, and the pushrods hitting the inside of the heads. So be careful and set them up right

[1992MustangDW]

well I just got a mustang 5.0 book they had put a set on a stock 5.0 with stage 2 trickflow cam.

[347sc]

Just throw it together, then check the piston to valve clearance.


Best advice right there. And as Bangingears said check the valve train geometry

[1992MustangDW]

I guess I will just have andy law do it

[NXcoupe]

well I just got a mustang 5.0 book they had put a set on a stock 5.0 with stage 2 trickflow cam.

Ok, do you have the month of that 5.0 mag? I would like to read that article. thanks.

[1992MustangDW]

http://musclemustangfastfords.automotive.com/117062/mmfp-0910-building-400hp-into-a-5-0-l-small-block-engine/index.html

See if you can find something I missed.