8.8 PART OUT: Moser 5 Lug, Cobra Brake setup, Aluminum Diff Cover, 3.73's, Solid CA's

[5.0calypso93lx]

I think I'm going to have better luck moving this rear end parting it out and I know how you guys love part outs!

I have the 8.8 out of my 93' Mustang that I'm parting out. I built this rear end about 2 years ago and didn't even drive the car 1k miles. Every part was bought BRAND NEW and all parts are in like new condition.

1) Moser 5 Lug Fox Length 28 spline axles with new stock wheel studs that were installed when the axles were bought new - $200 + shipping

2) Ford Racing 3.73 Gears - $130 + shipping

3) Summit Racing Aluminum 8.8 Differential Cover - $130 + shipping

4) Stock Traction Lok Differential - $50 + shipping

5) North Cobra Race Car Cobra brake adapters, painted with POR 15 - $130 + shipping

6) Brembo slotted Cobra rear 11.65" rotors - $150 + shipping

7) Ford Anti Moan braces specific to Cobra brakes - $80 + shipping

8) Cobra rear brake calipers with the cobra specific mounting brackets. NAPA gold pads will also be include - $150 + shipping

9) MAC Solid upper and lower control arms. These are the powdercoated black versions with poly bushings and sway bar mounts - $130 + shipping

I do accept paypal. Please bear with me on shipping. I work two jobs at 70+ hours a week so it can be difficult to find time to ship items.

I am going to be pulling the rear end this weekend and start disassembly. I will take pictures of everything then and post them up here. Please let me know if you have any questions about anything.

[92coupe]

James i am interested in the axles. Did you run a spacer on them to center the rotor?

[5.0calypso93lx]

James i am interested in the axles. Did you run a spacer on them to center the rotor?

Brian, these didn't need any spacer to work on my brake setup. The rotor was perfectly centered in between the caliper.

[92coupe]

Let me know when you get them removed.

[5.0calypso93lx]

Let me know when you get them removed.

Sounds good, I'll get them out this weekend.

[5.0calypso93lx]

Got most everything out today. Still need to pull the rear end and remove the control arms and gears. Everything else is out and ready to go:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1434.jpg

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1435.jpg

Calipers do come with the correct banjo bolts. I'd recomend picking up some new crush washers though.

The threads on the outside of the diff cover on the left snubber are cracked, but I checked and there's still enough there so you can move the snubber in and out fine. I'll knock it down to $100 shipped for this:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1436.jpg

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1437.jpg

[1baddlx]

that sucks i woulda bought the whole rearend

[92coupe]

Got most everything out today. Still need to pull the rear end and remove the control arms and gears. Everything else is out and ready to go:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1434.jpg

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1435.jpg

Calipers do come with the correct banjo bolts. I'd recomend picking up some new crush washers though.

The threads on the outside of the diff cover on the left snubber are cracked, but I checked and there's still enough there so you can move the snubber in and out fine. I'll knock it down to $100 shipped for this:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1436.jpg

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1437.jpg


James can you get me an address and time, I will come get the axles.

[5.0calypso93lx]

Bump!

[5.0calypso93lx]

Axles sold, thanks Brian!

Diff cover is pending also.

[leroy93lx]

Are You needing 3.27s? I think I have a complete rearend with 3.27s if you need them

[5.0calypso93lx]

Are You needing 3.27s? I think I have a complete rearend with 3.27s if you need them

I have the stock 3.27's out of this rear end actually, but a brand new set of FRPP 3.27's sounds nice lol. Thanks though!

[leroy93lx]

HaHa ! True True.....

[5.0calypso93lx]

Gears are no longer for sale :lol:

[Gearhead]

Any of the following still available?

5) North Cobra Race Car Cobra brake adapters, painted with POR 15 - $130 + shipping

6) Brembo slotted Cobra rear 11.65" rotors - $150 + shipping

7) Ford Anti Moan braces specific to Cobra brakes - $80 + shipping

8) Cobra rear brake calipers with the cobra specific mounting brackets. NAPA gold pads will also be include - $150 + shipping

Would anything else be needed other than axles to convert a fox to rear 5 lug ??

[5.0calypso93lx]

Any of the following still available?

5) North Cobra Race Car Cobra brake adapters, painted with POR 15 - $130 + shipping

6) Brembo slotted Cobra rear 11.65" rotors - $150 + shipping

7) Ford Anti Moan braces specific to Cobra brakes - $80 + shipping

8) Cobra rear brake calipers with the cobra specific mounting brackets. NAPA gold pads will also be include - $150 + shipping

Would anything else be needed other than axles to convert a fox to rear 5 lug ??

All of it is still available! I do have a guy on corral asking about the anti moans, but haven't seen any payment yet.

Nope, that's the only thing I've sold so far and I had this setup on my car 5 lugged!

[92coupe]

Thanks for the axles James!!

[5.0calypso93lx]

Thanks for the axles James!!

No problem Brian, good luck with the car!

[Gearhead]

All of it is still available! I do have a guy on corral asking about the anti moans, but haven't seen any payment yet.

Nope, that's the only thing I've sold so far and I had this setup on my car 5 lugged!

Sent ya a PM back !!

[5.0calypso93lx]

The Mac control arms are now out and ready to sell. They've got a few bumps and bruises on them from installing and moving the rear end around but they're in good shape and the bushings are like new.

$100

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1487.jpg

I also still have the summit diff cover:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1462.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1463.jpg

[Marker1989]

I think Ill take the control arms. Pm me some contact info

[5.0calypso93lx]

I think Ill take the control arms. Pm me some contact info

TonyT wants them, we're just trying to find a time to meet up.

[Mbubby61]

the cobra rear brakes, cobra specific brackets, napa pads,,, would i be able to bolt these on as is for a rear drum to disc conversion ?

[5.0calypso93lx]

Those are sold.

Can a mod delete or close please?