two 302 cams roller and none

[boosted 98]

one cam is a hydrolic roller blower/turbo cam and the other is a solid flat tappet i dont know the size of the solid one but it is brand new from edelbrock and i have lifters for both cams. make offer if interested i can get you the cam number so you can look them up. 513 403-7647

[draggin50]

whats the specs on the hyd roller cam and how much

[boosted 98]

Product Line: Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L
Part Type: Camshafts
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 2,000-5,500
Intake Duration at 050 inch Lift: 221
Exhaust Duration at 050 inch Lift: 225
Duration at 050 inch Lift: 221 int./225 exh.
Advertised Intake Duration: 275
Advertised Exhaust Duration: 279
Advertised Duration: 275 int./279 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.499 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.499 int./0.510 exh. lift
Lobe Separation (degrees): 112
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
Computer-Controlled Compatible: Yes
Grind Number: HR-224/339-2S-12
Quantity: Sold individually.

Camshaft, Track Max, Hydraulic Roller Tappet, Advertised Duration 275/279,Lift .499/.510, Ford, 5.0, 5.8L

$100 with roller lifters

[boosted 98]

i think this is the other cam. i cant make out the numbers 100% but it is new with lifters



Performer RPM
289-302 V8 7122* #7122

ENGINE: FORD 289-302 V8
RPM RANGE: 1500-6500

Duration at 0.006" Lift: Intake: 290° Exhaust: 300°
Duration at 0.050" Lift: Intake: 224° Exhaust: 234°
Lift at Cam: Intake: 0.310" Exhaust: 0.325"
Lift at Valve: Intake: 0.496" Exhaust: 0.520"
Timing at 0.050" lift: Open Close
Intake: 5° BTDC 39° ABDC
Exhaust: 54° BBDC 0° ATDC
Centerlines: Lobe Separation - 112° Intake Centerline - 107°

Note: Screw-in studs and guideplates required.



$60.00

[draggin50]

i was the one who called earlier. if you still have the tfs cam and the pushrods ill get a hold of you this saturday.

[boosted 98]

ok i dont think they are going anywhere

[draggin50]

ok ill call saturday morning

[ryan]

do you still have the trick flow cam/lifters? if so whats the cash offer if i pick it up? thanks...