93 GT Vert 317 stroker

[blown96cobra]

1993 Ford Mustang GT Convertible- Black w/black leather interior, 317 stroker from pacific performance products, ross .030 forged pistons, forged eagle I beam rods, forged eagle crank, internally ballanced, custom grind roller cam (224/234 532/536 112), main girdle, Trick Flow Twisted Wedge track heat heads, 1.7 roller rockers, Trick Flow track heat upper and lower intake, Trick Flow satin black valve covers, BBK 70mm Throttle body and EGR spacer, BBK cold air kit, stock 19lb injectors and maf, ford racing underdrive pulleys, canton 7qt oil pan high flow oil pump, arp oil pump shaft, all arp hardware,aftermarket ballancer, full length bbk ceramic coated headers, 3in xpipe, 3in flowmaster 40 series,ford racing aluminum radiator and black magic electric fan,ford racing plug wires, ford racing z transmission, hurst shifter,king cobra clutch,3.73 rear, full roll cage w/removable sides for ease entering and exiting, edelbrock drag coil overs on front, lakewood 50/50 shocks on rear, steeda rear springs,tubular kmember,adjustable camber plates, fiberglass trunk lid, aluminum drive shaft, autometer guages, proform shiftlight, new 17x9 in Cobra Rs with new sumitomo tires, new top, drilled and slotted rotors on front, upgraded calipers, no heat or a/c, does have power steering, newer paint. SCT 7 position switch chip (uninstalled). Ive got the upper and lower off of it now due to an idiot using the cork gaskets on the front and rear of the intake but it should be back together later this week. I would be interested in taking a "more mild" 5spd 5.0 as partial trade 87-93 only no speed density or carb cars. $8000.00 obo i can part it out for around the same. ill post pics later this week. :bigthumb pm me with offers.

[blown96cobra]

1993 Ford Mustang GT Convertible- Black w/black leather interior, 317 stroker from pacific performance products, ross .030 forged pistons, forged eagle I beam rods, forged eagle crank, internally ballanced, custom grind roller cam (224/234 532/536 112), main girdle, Trick Flow Twisted Wedge track heat heads, 1.7 roller rockers, Trick Flow track heat upper and lower intake, Trick Flow satin black valve covers, BBK 70mm Throttle body and EGR spacer, BBK cold air kit, stock 19lb injectors and maf, ford racing underdrive pulleys, canton 7qt oil pan high flow oil pump, arp oil pump shaft, all arp hardware,aftermarket ballancer, full length bbk ceramic coated headers, 3in xpipe, 3in flowmaster 40 series,ford racing aluminum radiator and black magic electric fan,ford racing plug wires, ford racing z transmission, hurst shifter,king cobra clutch,3.73 rear, full roll cage w/removable sides for ease entering and exiting, edelbrock drag coil overs on front, lakewood 50/50 shocks on rear, steeda rear springs,tubular kmember,adjustable camber plates, fiberglass trunk lid, aluminum drive shaft, autometer guages, proform shiftlight, new 17x9 in Cobra Rs with new sumitomo tires, new top, drilled and slotted rotors on front, upgraded calipers, no heat or a/c, does have power steering, newer paint. SCT 7 position switch chip (uninstalled). Ive got the upper and lower off of it now due to an idiot using the cork gaskets on the front and rear of the intake but it should be back together later this week. I would be interested in taking a "more mild" 5spd 5.0 as partial trade 87-93 only no speed density or carb cars. $8000.00 obo i can part it out for around the same. ill post pics later this week. :bigthumb pm me with offers.

*****update ***** i reinstalled the upper and lower with new arp intake studs and felpro gaskets along with a fresh oil change. the car runs,idles perfect and is waiting for its new owner. May be interested in 1000CC sportbikes as a partial trade too. would prefer an 05 Raven R1.

[ryan]

hey guys i have seen this car its a very nice looking car and its a very sweet sounding car and looks like it will run very very well i would say it is capable of running low 11`s maybe high 10`s if it hooks up. it has a tun of money invested in it. the exhaust is all chrome under neath and the motor looks awsome to very sharp car well good luck on this car. talk to ya later josh....

[blown96cobra]

thanks for the kind words Ryan

[corey331]

I can attest to how much time and money is in this car. It used to be mine and I built it...... still miss my baby, had it for 11 years...

[blown96cobra]

1993 Ford Mustang GT Convertible- Black w/black leather interior, 317 stroker from pacific performance products, ross .030 forged pistons, forged eagle I beam rods, forged eagle crank, internally ballanced, custom grind roller cam (224/234 532/536 112), main girdle,Fox Lake stage 2 cnc ported Trick Flow Twisted Wedge heads , scorpion 1.6 roller rockers, Trick Flow track heat upper and lower intake, Trick Flow satin black valve covers, BBK 70mm Throttle body and EGR spacer, BBK cold air kit, stock 19lb injectors and maf, ford racing underdrive pulleys, canton 7qt oil pan high flow oil pump, arp oil pump shaft, all arp hardware.28oz sfi ballancer, full length 1 3/4in Mac ceramic coated headers, 3in VRS Stainless xpipe, 3in flowmaster 40 series,ford racing aluminum radiator and black magic electric fan,ford racing plug wires, ford t-5 case w/richmond gear set, hurst shifter, spec stage 2 clutch ram lightweight billet flywheel,3.73 rear, full roll cage w/removable sides for ease entering and exiting, lakewood 90/10 with a mmr coil over kit, lakewood 50/50 shocks on rear, steeda rear springs, PA performance chromoly tubular kmember w/matching a arms, UPR adjustable camber plates, fiberglass trunk lid, aluminum drive shaft, autometer guages, proform shiftlight, new 17x9 in Cobra Rs with new sumitomo tires, new top, drilled and slotted rotors on front, upgraded calipers, no heat or a/c, does have power steering, newer paint. SCT 7 position switch chip (uninstalled). Ive got the upper and lower off of it now due to an idiot using the cork gaskets on the front and rear of the intake but it should be back together later this week. I would be interested in taking a "more mild" 5spd 5.0 as partial trade 87-93 only no speed density or carb cars. $8000.00 obo i can part it out for around the same. ill post pics later this week. :bigthumb pm me with offers. ****update**** the previous owner contacted me and i made some corrections to the parts list.

[corey331]

If anybody would like pics from the build, I have tons of them. I have pics to verify the internals of the engine, the heads, everything. I think I even still have the sheet with the flow numbers for the heads around here somewhere.

[tonyr]

This is a nice car sounds and looks awesome you can tell it was put together right and it looks like it runs strong

[blown96cobra]

Id like some pics from the build if you dont mind emailing them to me. my email address is narco655001@yahoo.com

[blown96cobra]

HERE YA GO IGNORE THE C5 PICS http://s643.photobucket.com/albums/uu159/narco655001/

[blown96cobra]

price drop 7500 or trade. this car needs a new owner.

[blown96cobra]

Someone make me an offer!

[corey331]

Wow, that thing looks completely different then when I had it!!! I found a few of the pics of the motor as it was assembled.

http://usera.ImageCave.com/corey331/NewAlbum/fall%202008%20048.jpg
http://usera.ImageCave.com/corey331/NewAlbum/fall%202008%20049.jpg
http://usera.ImageCave.com/corey331/NewAlbum/fall%202008%20053.jpg




Here is the K-member and coil-overs I used
http://usera.ImageCave.com/corey331/baseball%20and%20weddings%20005.jpg

And here is what the car would look like if taken back to the drag look
http://usera.ImageCave.com/corey331/509897_25_full.jpg


Hope all this helps ya man!!!

[87stangbbb]

that vert looks sick

[88lxvert]

i know u said sport bike but i thought i would see this is a sick bike

http://www.stangbangerz.com/forums/showthread.php?t=60493

[draggin50]

I love the car. Looks mean with the hood and welds. If ya ever need a 92 Gt just let me know.

[cystang]

The car is awesome and looks great good luck,,,/

[blown96cobra]

Willing to trade straight up for a nice driver with
bolt ons. Must have heat. Any takers?

[blown96cobra]

ttt. Someone make an offer. I really want a stang I can drive daily or another sportbike.

[draggin50]

Makes me wanna go put the heater box back in mine!

[1987coupe]

i have a 2000 yamaha r6 with a bunch of goodies

[blown96cobra]

I'm way to big for an r6. I'm looking for an r1,zx10,gsxr1000. Some sort of liter bike.

[blown96cobra]

Deal pending.

[blown96cobra]

Deal fell threw. ttt

[347sc]

This car is is nice and has alot of nice parts on it, some one will get a deal. If only it wasnt a vert Id have it right now.

Good luck and thanks for offer.

[blown96cobra]

I'm gonna start parting it out so let me know what u want. I'll pull parts as there paid for. I'd like to sell the car as a roller. Rather than pick it apart.

[87stangbbb]

would you sell the hood?

[blown96cobra]

317 Short block $2000. I have a reciept for 4000
fox lake prepped trickflow heads were 3k new so I think $ 2000 is fair
trickflow trackheat upper and lower with bbk 70mm tbody & egr $350
1 3/4 mac ceramic coated longtubes $250
3in vrs xpipe $100 $175 with flowmasters
17 in cobra r's with new tires-$450
I would sell the car as roller for $2800.
Hit me up with what u need. 740 222 8745.

[cystang]

That all sounds like a very good deal ..I would like 2 see someone buy it as a driver very nice car glws....

[draggin50]

Id stil like to have it but its been to cold to put a heater box in mine.

[leroy93lx]

I have a heater box assembly you can have if needed . It might help entice a potential buyer having the option to put heat and ac back in it.

[draggin50]

I already got one but my heater in the garage took a crap. Its just been to cold to get out and do it. It wouldnt be so bad but the cage goes down through the dash so its just going to be a pain. I may do it this weekend in a friends garage.

[blown96cobra]

In the process of an efi to carb swap. This should bring it to life. I also have the heaterbox for the car but have absolutely no idea how to reinstall it since I didn't take it out.

[draggin50]

They arent bad to put in really. Once you get the dash out of the way it pretty much falls into place. Why are you going to a carb setup?

[blown96cobra]

Couldn't get the efi to work right. I'm just tired of messing with it. Carbs so much easier and make tons of power.

[draggin50]

Ive had my share of both and I still prefer the FI over carb due to the driveability. Carbs seem to be the cheaper way out and do make the power though. It just sucks having to change over everything. Good luck with it. So are you going to keep it now?

[blown96cobra]

No I'll still get rid of it I just couldn't dump it on someone else the way it was running.

[tylerconner08]

how does it run? did you get it dynoed?

[blown96cobra]

Not sur yet. I'll have it done tomorrow. My friend has almost the exact same setup in a lx and it ran 6.51 in the 1/8. Anything under 7 and I'm happy.

[draggin50]

So is carbed now?

[blown96cobra]

Yep carb and intake are on it. Just waiting for a warmer day to finish up the lines.

[draggin50]

What carb and intake

[blown96cobra]

700 double pumper, Parker funnel web

[blown96cobra]

Price drop $5500. Firm someone come get this car. It's 95% done. Just needs the dist. Put back in, timing set, throttle linkage finished and an oil change.

[blown96cobra]

Please delete. I'm just gonna finish get some time slips and sell it for what it's worth.