flybye
12-08-2009, 01:46 AM
It is a clean title and reads 70,500 miles. But it "exceeds mechanical limits". I really would like to keep this car but am wanting an SN95 at the same time. If this car doesn't sell then keeping it is not a problem. I will trade for a 94+ rolling chassis or MAYBE a coupe.
The good:
Paint is 6.5/10 and enamel
Sound deadening is removed
t-5 car with pedal assembly and console (out of car)
Black headlight covers
Weld 15x8 draglite rears with BFG t/a radials
New Jegs 15x4 draglite fronts with 165/80/15's
BBK front springs/4cyl rears
Strange 10 way adjustable front struts (not installed)
Megabite jr rear control arms
Adjustable upper rear control arms
3.90 gears
4 inch cowl hood
Supposedly has a walbro 255 pump?
Rust free GT hatch and spoiler
D&D Tubular A-arms (not installed)
Jegster bolt in subframe ties
Jegster solid motor mounts
Torque box reinforcemnt plates (not installed)
Aftermarket black carpet (rest of the interior is grey but all of it is out)
The bad:
small crack/tiny hole in drivers floor
Front corners of floor board have holes (all can be patched)
No engine harness
Body harness was cut out, but all male and female clips are still there for the lights and ignition. I do have the body harness as well. It will all need wired back up though.
No keys and needs new ignition cylinder
I have all of the parts to put this car back together except for most of the driveline. I will even toss in some of the other parts I have posted for sale for a little extra. This is just a feeler, but for the right price I will let it go. You can easily part this car out and make your money back. I just don't have the time or patience for it right now. All this car really needs is a little work on the floors and put back together.
I am looking for $2,500 OBO. I am also willing to make a deal with or without certain parts and am VERY open to trades.
The blue on the front bumper was from the previous owner. It can easily be repainted. I did rub alot of the overspray off with paint thinner though. Since it is an enamel paint job that might work on the whole bumper? If you want more pics and info then please pm me.
http://i9.photobucket.com/albums/a88/seandb20/IMG_1280.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1277.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1275.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1279.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1453.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1452.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1448.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1538.jpg
http://i9.photobucket.com/albums/a88/seandb20/2009-11-20140300.jpg
Here is when a buddy of mine owned it
http://i9.photobucket.com/albums/a88/seandb20/100_0960.jpg
The good:
Paint is 6.5/10 and enamel
Sound deadening is removed
t-5 car with pedal assembly and console (out of car)
Black headlight covers
Weld 15x8 draglite rears with BFG t/a radials
New Jegs 15x4 draglite fronts with 165/80/15's
BBK front springs/4cyl rears
Strange 10 way adjustable front struts (not installed)
Megabite jr rear control arms
Adjustable upper rear control arms
3.90 gears
4 inch cowl hood
Supposedly has a walbro 255 pump?
Rust free GT hatch and spoiler
D&D Tubular A-arms (not installed)
Jegster bolt in subframe ties
Jegster solid motor mounts
Torque box reinforcemnt plates (not installed)
Aftermarket black carpet (rest of the interior is grey but all of it is out)
The bad:
small crack/tiny hole in drivers floor
Front corners of floor board have holes (all can be patched)
No engine harness
Body harness was cut out, but all male and female clips are still there for the lights and ignition. I do have the body harness as well. It will all need wired back up though.
No keys and needs new ignition cylinder
I have all of the parts to put this car back together except for most of the driveline. I will even toss in some of the other parts I have posted for sale for a little extra. This is just a feeler, but for the right price I will let it go. You can easily part this car out and make your money back. I just don't have the time or patience for it right now. All this car really needs is a little work on the floors and put back together.
I am looking for $2,500 OBO. I am also willing to make a deal with or without certain parts and am VERY open to trades.
The blue on the front bumper was from the previous owner. It can easily be repainted. I did rub alot of the overspray off with paint thinner though. Since it is an enamel paint job that might work on the whole bumper? If you want more pics and info then please pm me.
http://i9.photobucket.com/albums/a88/seandb20/IMG_1280.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1277.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1275.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1279.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1453.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1452.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1448.jpg
http://i9.photobucket.com/albums/a88/seandb20/IMG_1538.jpg
http://i9.photobucket.com/albums/a88/seandb20/2009-11-20140300.jpg
Here is when a buddy of mine owned it
http://i9.photobucket.com/albums/a88/seandb20/100_0960.jpg