347 short block and other parts

[draggin50]

I have a 347 shortblock with Probe pistons, Scat series 9000 crank and 4340 H beam rods ARP main studs, Fluid damper balancer, Pete Jackson gear drive. It does need new cam bearings and has no cam. $1000
Stock 5.0 roller block $75
Stock 5.0 roller block $50
Eagle SIR rods $100
ARP main studs $35

[draggin50]

Also have a steel main girdle but dont have the studs and I`ll take $50 for it.
Stock Trw forged pistons and stock rods $50

[1987coupe]

I have a 347 shortblock with Probe pistons, Scat series 9000 crank and 4340 H beam rods ARP main studs, Fluid damper balancer, Pete Jackson gear drive. It does need new cam bearings and has no cam. $1000
Stock 5.0 roller block $75
Stock 5.0 roller block $50
Eagle SIR rods $100
ARP main studs $35

is the engine put together, has it been run?

[draggin50]

It is together and has been run. It went 11.30s with vic jr heads and xe274hr cam fuel injected.

[1987coupe]

so its a complete short block minus the cam

[draggin50]

Yes. its complete but it does need new cam bearings and camshaft. I had no problems with it and it didnt smoke and held good oil pressure.

[draggin50]

Heres a pic sorry its from my phone.

[draggin50]

Sorry here it is.

[draggin50]

more pics

[TurboNG]

I posted on DSB I'm interested in the short block

[draggin50]

The shortblock may be sold. Ill know more in the morning and ill update everyone.

[draggin50]

The 347 shortblock and main girdle are gone. Thanks

[draggin50]

Still have both blocks, Eagle SIR rods and main studs Stock crank rods and pistons and Ill let everything go for $200

[draggin50]

Package deal $200 and ill throw some other parts in too. got a set of lx tailights and nice amber corner lights also in it.

[draggin50]

I still have 1 stock bore roller block with stock rods and Trw forged pistons. Ill take $50 for it all.

[86foureyes]

did you get rid of eagle rods?