Fitting for brake line fox to sn95

[92coupe]

I am in the middle of putting my sn95 spindles and cobra calipers on. I ran into the right side the brake line fitting is larger than the one on the hose for the cobra caliper.

I remember someone telling me what you needed to overcome this. I cant for the life of me remember where to find it. Does anyone have any idea what size this is and where to find it?

Thanks Brian

[aperacer]

i want to say steeda or maximum motorsports

[347sc]

I picked mine up at NAPA. Take your old line and new line in and tell them you want the female to male adapter.

[Pitbull1052]

i got mine at advanced I don't remember the size and that's what I did is took my line with me

[92coupe]

Thaanks guys, I guess that's what ill do.

[1992MustangDW]

will you post the part number please?

[1987coupe]

i work at the napa store in wilmington and the part number is 7818 made by weatherhead so if you havent found one yet go to your local napa and ask for a weatherhead part number 7818 and you will be set.:bigthumb

[1992MustangDW]

thank you

[Pitbull1052]

when I did mine I went to look for that pn and obviously only NAPA has that pn, I just went to Advanced right there in Amelia and he took me back to the bin and found the correct one..... I don't remember the pn though I just knew I wasnt about to drive to norwood to go to Napa..... nothing against napa just going with what was around me

[92coupe]

i work at the napa store in wilmington and the part number is 7818 made by weatherhead so if you havent found one yet go to your local napa and ask for a weatherhead part number 7818 and you will be set.:bigthumb

Thanks, I have a napa on rt50 in cleves close to me.

[1987coupe]

any more questions let me know:bigthumb

[92coupe]

I pickep up 3 fittings tonight at advance. They are 3/16 x 1/4 they measure off the size brake line.

[Pitbull1052]

I couldnt remember the measurement but that's what I got as well

[Gearhead559]

i have a few of them around the shop....always seem to be needing them.