View Full Version : fuel cell guys
pegasus
01-21-2010, 03:29 PM
how do u vent your cell??
should i put a filter on the hose end some how ??
mustangboy
01-21-2010, 03:40 PM
I ran a piece of braided hose and looped it then to a bulkhead fitting rather than just a hole in the floor. It looked better and you did not have to worry about chaffing. I did not run any type of filter.
Black Horse
01-21-2010, 05:45 PM
Does the vent port have a check valve? For the road race car (even with a check valve) I run a hose out, give it a few pig tail type loops and run it out under the floor with a bulk-head fitting. Never had any slosh out problems!
Jeff88coupe
01-21-2010, 05:59 PM
I used a piece of 6an pushlock hose. Did the same as above...put a few coils in it..then ran it threw the floor under the trunk. I did put a small cheap plastic fuel filter on the end of it...just found a cheap on that fit at the parts store.
http://farm4.static.flickr.com/3110/2305405689_7d321c5e41.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.